IBM Builds Nanotube Chip

George · 25-03-2006, 11:25 AM

IBM Builds Nanotube Chip

Big Blue researchers’ feat suggests the material could be a candidate to replace silicon in chips.
March 23, 2006

IBM researchers have achieved a milestone by creating an integrated circuit out of a single carbon nanotube, a feat that makes the material a likely candidate to replace silicon as the main ingredient for making chips.

Big Blue plans to detail the accomplishment in the journal Science on Friday.

Long thought to be a good candidate for replacing silicon, carbon nanotube has posed great challenges for scientists who try to coax transistors out of the material and create an integrated circuit (IC). ICs are chips that process and store information in a variety of electronics devices, from computers to cell phones.

Creating carbon nanotube transistors has been done before, but figuring out a reliable way to assemble them to form an IC has stumped many bright minds. Wiring together transistors developed from a single carbon nanotube is an even more difficult task.

But the IBM research team did it. With an 18-micron long carbon nanotube, the scientists built a 10-transistor ring oscillator, a device typically constructed to test new manufacturing technologies or materials. Using one instead of many carbon nanotubes to build an IC reduces the manufacturing steps and therefore cost.

“We were working on it for one tough year.” said Joerg Appenzeller, an IBM researcher who worked on the project, which also involved researchers from the University of Florida and Columbia University in New York.

The feat will advance the engineering and manufacturing of carbon nanotube chips for the commercial market. Electrical current moves more freely and faster through carbon nanotube than silicon, making carbon nanotube a more energy-efficient material for a speedier chip. It also is super small. A nanometer is a billionth of a meter, and a carbon nanotube is 50,000 times thinner than a human hair.

All these properties make carbon nanotube an appealing candidate for improving performance by piling on more and smaller transistors on a chip without causing overheating.

But the material also is difficult to manipulate so that it develops uniformly during the chip-making process. More research will have to be done to figure out how to cheaply and efficiently make carbon nanotube chips that can outperform silicon chips.

“It’s a way off,” said Fred Zieber, an analyst at Pathfinder Research, about commercializing carbon nanotube chips. “It could be a few years or an eternity.”

IBM’s carbon nanotube IC is nearly a million times faster than previous ICs built with multiple carbon nanotubes. Even then, IBM’s prototype clocks only at 50 megahertz. The fastest chip on the market today is a 3.8-gigahertz Pentium 4 by Intel.

Mr. Appenzeller won’t even give his estimate of when carbon nanotube chips will be available for the commercial market. But he and his colleagues aim to build one in the gigahertz range, possibly within two years. The long-term goal is to build a terahertz chip.

“It’s like the first time we built a car,” Mr. Appenzeller said. “Now we know the obstacles, and we have ideas on how to improve it.”

‘Now we know the obstacles, and we have ideas on how to improve it.’

- Joerg Appenzeller,

IBM

25-03-2006, 11:25 AM	#1
George Newbie Join Date: Nov 2005 Location: India Age: 26 Posts: 12 Thanks: 0 Thanked 3 Times in 2 Posts Rep Power: 3	IBM Builds Nanotube Chip IBM Builds Nanotube Chip Big Blue researchers’ feat suggests the material could be a candidate to replace silicon in chips. March 23, 2006 IBM researchers have achieved a milestone by creating an integrated circuit out of a single carbon nanotube, a feat that makes the material a likely candidate to replace silicon as the main ingredient for making chips. Big Blue plans to detail the accomplishment in the journal Science on Friday. Long thought to be a good candidate for replacing silicon, carbon nanotube has posed great challenges for scientists who try to coax transistors out of the material and create an integrated circuit (IC). ICs are chips that process and store information in a variety of electronics devices, from computers to cell phones. Creating carbon nanotube transistors has been done before, but figuring out a reliable way to assemble them to form an IC has stumped many bright minds. Wiring together transistors developed from a single carbon nanotube is an even more difficult task. But the IBM research team did it. With an 18-micron long carbon nanotube, the scientists built a 10-transistor ring oscillator, a device typically constructed to test new manufacturing technologies or materials. Using one instead of many carbon nanotubes to build an IC reduces the manufacturing steps and therefore cost. “We were working on it for one tough year.” said Joerg Appenzeller, an IBM researcher who worked on the project, which also involved researchers from the University of Florida and Columbia University in New York. The feat will advance the engineering and manufacturing of carbon nanotube chips for the commercial market. Electrical current moves more freely and faster through carbon nanotube than silicon, making carbon nanotube a more energy-efficient material for a speedier chip. It also is super small. A nanometer is a billionth of a meter, and a carbon nanotube is 50,000 times thinner than a human hair. All these properties make carbon nanotube an appealing candidate for improving performance by piling on more and smaller transistors on a chip without causing overheating. But the material also is difficult to manipulate so that it develops uniformly during the chip-making process. More research will have to be done to figure out how to cheaply and efficiently make carbon nanotube chips that can outperform silicon chips. “It’s a way off,” said Fred Zieber, an analyst at Pathfinder Research, about commercializing carbon nanotube chips. “It could be a few years or an eternity.” IBM’s carbon nanotube IC is nearly a million times faster than previous ICs built with multiple carbon nanotubes. Even then, IBM’s prototype clocks only at 50 megahertz. The fastest chip on the market today is a 3.8-gigahertz Pentium 4 by Intel. Mr. Appenzeller won’t even give his estimate of when carbon nanotube chips will be available for the commercial market. But he and his colleagues aim to build one in the gigahertz range, possibly within two years. The long-term goal is to build a terahertz chip. “It’s like the first time we built a car,” Mr. Appenzeller said. “Now we know the obstacles, and we have ideas on how to improve it.” ‘Now we know the obstacles, and we have ideas on how to improve it.’ - Joerg Appenzeller, IBM __________________ George Tharakan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Server Builds	Marvin	Windows Server 2003	4	28-08-2007 09:24 AM
Windows Live Makes It Into New Vista Test Builds	Dark Star	Windows 98/2000/ME/XP/2003/Vista	1	18-08-2006 12:45 PM
WinAmp v5.25.*** beta builds	ABHISHEK	Software Releases	10	17-08-2006 11:36 PM
Nanotube Lubricated Harddrives	bakuryu	Technical Discussions	0	05-07-2006 03:21 PM
MIT Builds Batteries with Viruses	AiM	Technical Discussions	0	10-04-2006 03:10 PM

New To Site?	Need Help?
Register to Participate Meet our Staff Refer Forum Rules Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

IBM Builds Nanotube Chip

Technical Discussions