New Kodak EasyShare Software (ver. 6.4) Available Today

Cal Bear '66

The firmware update is for the PRINTER not the camera.

When you downloaded the DRIVER, did you look for the install_easyshare.exe
and double click it to run the installation procedure.

Here is the link for the XP firmware and printer driver updates:

http://www.kodak.com/global/en/servi...oadLanguage=en

Download the file onto your computer.

Locate and double-click the install_easyshare.exe file to begin the
installation.

NOTE: During this installation, only the drivers install, not EASYSHARE
Software.

When the Setup Wizard screen appears, click Next.

Select Modify, and click Next.

When the Custom Setup screen appears, verify that Up-to-date is selected for
Kodak EasyShare printer dock or photo printer, and click Next.

When the Ready to modify the program screen appears, click Next. When the
installation is done, a Congratulations, the software is now installed message
appears
..
If you have a Printer Dock Plus Series 3 or Photo Printer 500, visit the APPLE
Web site and download BONJOUR Software free of charge.
NOTE: You must install BONJOUR Software on your computer before you can use your
printer as a wireless device.



I Bleed Blue and Gold
GO BEARS!


"PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
news:136D4256-9938-4C7B-8930-6CDBD40B6B18@microsoft.com...
> may work with Vista but I'm running xp. I've already done this but it
> downloads the drivers into a .cab file. XP is looking for a .inf file and
> don't know how to make xp understand. had no problem loading the firmware
> onto the camera but it didn't help the pc to printer problem. I purchased a
> 2 mg usb memory card, can load the pictures onto this and plug it into the
> printer, it's a workable work around. I give up for now, thanks for the help.
>
> "Cal Bear '66" wrote:
>
>> You can download and install printer drivers AND a FIRMWARE upgrade that will
>> enable you to print from the Kodak G600 -- both updates will be necessary for
>> you to print to the G600 from within Vista:
>>
>> http://www.kodak.com/global/en/servi...l?pq-path=9367
>>
>> Please read and follow the instructions TO THE LETTER (especially the
>> firmware
>> upgrade).
>>
>>
>> I Bleed Blue and Gold
>> GO BEARS!
>>
>>
>> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> news:3725D7C2-35A7-4160-93DA-5739479E7079@microsoft.com...
>> > model # is g600. nifty little printer if you want to print from your
>> > camera
>> > but would really like to print from the pc and avoid the easyshare software
>> > if possible. great camera, just didn't do the research and sales people
>> > didn't enlighten me about needing a docking station to recharge the camera
>> > batteries.. or that the easyshare software was such a pain. I have
>> > alternate software but want to use the printing option. thanks for your
>> > help, kodak is useless.
>> >
>> > "Cal Bear '66" wrote:
>> >
>> >> What is the model number of your Kodak printer dock?
>> >>
>> >>
>> >> I Bleed Blue and Gold
>> >> GO BEARS!
>> >>
>> >>
>> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> >> news:469D97F6-35C9-4E45-ADFB-C5B9A70618DE@microsoft.com...
>> >> >I have pictures loaded on my pc and want to send them to the printer dock
>> >> >but
>> >> > the pc can't find the .inf file so the printer dock is not an option to
>> >> > print
>> >> > to.
>> >> >
>> >> > "Ryka" wrote:
>> >> >
>> >> >> Okay, I'll bite - why would you need to send pictures "back to the
>> >> >> camera
>> >> >> dock"? Do you mean you removed pictures from the camera after
>> >> >> downloading
>> >> >> them onto Easy Share? Or, are you attempting to download other pictures
>> >> >> to
>> >> >> your camera?
>> >> >>
>> >> >>
>> >> >>
>> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> >> >> news:95B67FE3-EA5A-49BC-9BD4-8650F0AA94F0@microsoft.com...
>> >> >> > you guys rock.. thanks to all the great suggestions I was finally
>> >> >> > able
>> >> >> > to
>> >> >> > load the EasyShare software. I'm now able to load my pictures
>> >> >> > directly
>> >> >> > from
>> >> >> > the camera but still can't send pictures back to the printer dock but
>> >> >> > it's
>> >> >> > progress. I'll keep reading, you guys are great!
>> >> >> >
>> >> >> > "PuppyFeet" wrote:
>> >> >> >
>> >> >> >> any suggestion on how to get this software to load? it stalls at
>> >> >> >> 93%
>> >> >> >> which
>> >> >> >> leaves off the printer dock & camera drivers. I've removed and
>> >> >> >> installed
>> >> >> >> too
>> >> >> >> many times, it won't load. Can't figure out what is keeping these
>> >> >> >> drivers
>> >> >> >> from loading. Kodak's only answer is to download the latest
>> >> >> >> software
>> >> >> >> or
>> >> >> >> load
>> >> >> >> it in safe mode. They seem to be clueless. I'm running xp w/sp2.
>> >> >> >>
>> >> >> >> "Cal Bear '66" wrote:
>> >> >> >>
>> >> >> >> > New Kodak EasyShare Software (ver. 6.4) Available Today
>> >> >> >> >
>> >> >> >> > http://kodak.com/eknec/PageQuerier.j...q-locale=en_US
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > I Bleed Blue and Gold
>> >> >> >> > GO BEARS!
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >>
>> >>
>> >>
>>
>>

Cal Bear '66

The firmware update is for the PRINTER not the camera.

When you downloaded the DRIVER, did you look for the install_easyshare.exe
and double click it to run the installation procedure.

Here is the link for the XP firmware and printer driver updates:

http://www.kodak.com/global/en/servi...oadLanguage=en

Download the file onto your computer.

Locate and double-click the install_easyshare.exe file to begin the
installation.

NOTE: During this installation, only the drivers install, not EASYSHARE
Software.

When the Setup Wizard screen appears, click Next.

Select Modify, and click Next.

When the Custom Setup screen appears, verify that Up-to-date is selected for
Kodak EasyShare printer dock or photo printer, and click Next.

When the Ready to modify the program screen appears, click Next. When the
installation is done, a Congratulations, the software is now installed message
appears
..
If you have a Printer Dock Plus Series 3 or Photo Printer 500, visit the APPLE
Web site and download BONJOUR Software free of charge.
NOTE: You must install BONJOUR Software on your computer before you can use your
printer as a wireless device.



I Bleed Blue and Gold
GO BEARS!


"PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
news:136D4256-9938-4C7B-8930-6CDBD40B6B18@microsoft.com...
> may work with Vista but I'm running xp. I've already done this but it
> downloads the drivers into a .cab file. XP is looking for a .inf file and
> don't know how to make xp understand. had no problem loading the firmware
> onto the camera but it didn't help the pc to printer problem. I purchased a
> 2 mg usb memory card, can load the pictures onto this and plug it into the
> printer, it's a workable work around. I give up for now, thanks for the help.
>
> "Cal Bear '66" wrote:
>
>> You can download and install printer drivers AND a FIRMWARE upgrade that will
>> enable you to print from the Kodak G600 -- both updates will be necessary for
>> you to print to the G600 from within Vista:
>>
>> http://www.kodak.com/global/en/servi...l?pq-path=9367
>>
>> Please read and follow the instructions TO THE LETTER (especially the
>> firmware
>> upgrade).
>>
>>
>> I Bleed Blue and Gold
>> GO BEARS!
>>
>>
>> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> news:3725D7C2-35A7-4160-93DA-5739479E7079@microsoft.com...
>> > model # is g600. nifty little printer if you want to print from your
>> > camera
>> > but would really like to print from the pc and avoid the easyshare software
>> > if possible. great camera, just didn't do the research and sales people
>> > didn't enlighten me about needing a docking station to recharge the camera
>> > batteries.. or that the easyshare software was such a pain. I have
>> > alternate software but want to use the printing option. thanks for your
>> > help, kodak is useless.
>> >
>> > "Cal Bear '66" wrote:
>> >
>> >> What is the model number of your Kodak printer dock?
>> >>
>> >>
>> >> I Bleed Blue and Gold
>> >> GO BEARS!
>> >>
>> >>
>> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> >> news:469D97F6-35C9-4E45-ADFB-C5B9A70618DE@microsoft.com...
>> >> >I have pictures loaded on my pc and want to send them to the printer dock
>> >> >but
>> >> > the pc can't find the .inf file so the printer dock is not an option to
>> >> > print
>> >> > to.
>> >> >
>> >> > "Ryka" wrote:
>> >> >
>> >> >> Okay, I'll bite - why would you need to send pictures "back to the
>> >> >> camera
>> >> >> dock"? Do you mean you removed pictures from the camera after
>> >> >> downloading
>> >> >> them onto Easy Share? Or, are you attempting to download other pictures
>> >> >> to
>> >> >> your camera?
>> >> >>
>> >> >>
>> >> >>
>> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> >> >> news:95B67FE3-EA5A-49BC-9BD4-8650F0AA94F0@microsoft.com...
>> >> >> > you guys rock.. thanks to all the great suggestions I was finally
>> >> >> > able
>> >> >> > to
>> >> >> > load the EasyShare software. I'm now able to load my pictures
>> >> >> > directly
>> >> >> > from
>> >> >> > the camera but still can't send pictures back to the printer dock but
>> >> >> > it's
>> >> >> > progress. I'll keep reading, you guys are great!
>> >> >> >
>> >> >> > "PuppyFeet" wrote:
>> >> >> >
>> >> >> >> any suggestion on how to get this software to load? it stalls at
>> >> >> >> 93%
>> >> >> >> which
>> >> >> >> leaves off the printer dock & camera drivers. I've removed and
>> >> >> >> installed
>> >> >> >> too
>> >> >> >> many times, it won't load. Can't figure out what is keeping these
>> >> >> >> drivers
>> >> >> >> from loading. Kodak's only answer is to download the latest
>> >> >> >> software
>> >> >> >> or
>> >> >> >> load
>> >> >> >> it in safe mode. They seem to be clueless. I'm running xp w/sp2.
>> >> >> >>
>> >> >> >> "Cal Bear '66" wrote:
>> >> >> >>
>> >> >> >> > New Kodak EasyShare Software (ver. 6.4) Available Today
>> >> >> >> >
>> >> >> >> > http://kodak.com/eknec/PageQuerier.j...q-locale=en_US
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > I Bleed Blue and Gold
>> >> >> >> > GO BEARS!
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >>
>> >>
>> >>
>>
>>

Cal Bear '66

The firmware update is for the PRINTER not the camera.

When you downloaded the DRIVER, did you look for the install_easyshare.exe
and double click it to run the installation procedure.

Here is the link for the XP firmware and printer driver updates:

http://www.kodak.com/global/en/servi...oadLanguage=en

Download the file onto your computer.

Locate and double-click the install_easyshare.exe file to begin the
installation.

NOTE: During this installation, only the drivers install, not EASYSHARE
Software.

When the Setup Wizard screen appears, click Next.

Select Modify, and click Next.

When the Custom Setup screen appears, verify that Up-to-date is selected for
Kodak EasyShare printer dock or photo printer, and click Next.

When the Ready to modify the program screen appears, click Next. When the
installation is done, a Congratulations, the software is now installed message
appears
..
If you have a Printer Dock Plus Series 3 or Photo Printer 500, visit the APPLE
Web site and download BONJOUR Software free of charge.
NOTE: You must install BONJOUR Software on your computer before you can use your
printer as a wireless device.



I Bleed Blue and Gold
GO BEARS!


"PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
news:136D4256-9938-4C7B-8930-6CDBD40B6B18@microsoft.com...
> may work with Vista but I'm running xp. I've already done this but it
> downloads the drivers into a .cab file. XP is looking for a .inf file and
> don't know how to make xp understand. had no problem loading the firmware
> onto the camera but it didn't help the pc to printer problem. I purchased a
> 2 mg usb memory card, can load the pictures onto this and plug it into the
> printer, it's a workable work around. I give up for now, thanks for the help.
>
> "Cal Bear '66" wrote:
>
>> You can download and install printer drivers AND a FIRMWARE upgrade that will
>> enable you to print from the Kodak G600 -- both updates will be necessary for
>> you to print to the G600 from within Vista:
>>
>> http://www.kodak.com/global/en/servi...l?pq-path=9367
>>
>> Please read and follow the instructions TO THE LETTER (especially the
>> firmware
>> upgrade).
>>
>>
>> I Bleed Blue and Gold
>> GO BEARS!
>>
>>
>> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> news:3725D7C2-35A7-4160-93DA-5739479E7079@microsoft.com...
>> > model # is g600. nifty little printer if you want to print from your
>> > camera
>> > but would really like to print from the pc and avoid the easyshare software
>> > if possible. great camera, just didn't do the research and sales people
>> > didn't enlighten me about needing a docking station to recharge the camera
>> > batteries.. or that the easyshare software was such a pain. I have
>> > alternate software but want to use the printing option. thanks for your
>> > help, kodak is useless.
>> >
>> > "Cal Bear '66" wrote:
>> >
>> >> What is the model number of your Kodak printer dock?
>> >>
>> >>
>> >> I Bleed Blue and Gold
>> >> GO BEARS!
>> >>
>> >>
>> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> >> news:469D97F6-35C9-4E45-ADFB-C5B9A70618DE@microsoft.com...
>> >> >I have pictures loaded on my pc and want to send them to the printer dock
>> >> >but
>> >> > the pc can't find the .inf file so the printer dock is not an option to
>> >> > print
>> >> > to.
>> >> >
>> >> > "Ryka" wrote:
>> >> >
>> >> >> Okay, I'll bite - why would you need to send pictures "back to the
>> >> >> camera
>> >> >> dock"? Do you mean you removed pictures from the camera after
>> >> >> downloading
>> >> >> them onto Easy Share? Or, are you attempting to download other pictures
>> >> >> to
>> >> >> your camera?
>> >> >>
>> >> >>
>> >> >>
>> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
>> >> >> news:95B67FE3-EA5A-49BC-9BD4-8650F0AA94F0@microsoft.com...
>> >> >> > you guys rock.. thanks to all the great suggestions I was finally
>> >> >> > able
>> >> >> > to
>> >> >> > load the EasyShare software. I'm now able to load my pictures
>> >> >> > directly
>> >> >> > from
>> >> >> > the camera but still can't send pictures back to the printer dock but
>> >> >> > it's
>> >> >> > progress. I'll keep reading, you guys are great!
>> >> >> >
>> >> >> > "PuppyFeet" wrote:
>> >> >> >
>> >> >> >> any suggestion on how to get this software to load? it stalls at
>> >> >> >> 93%
>> >> >> >> which
>> >> >> >> leaves off the printer dock & camera drivers. I've removed and
>> >> >> >> installed
>> >> >> >> too
>> >> >> >> many times, it won't load. Can't figure out what is keeping these
>> >> >> >> drivers
>> >> >> >> from loading. Kodak's only answer is to download the latest
>> >> >> >> software
>> >> >> >> or
>> >> >> >> load
>> >> >> >> it in safe mode. They seem to be clueless. I'm running xp w/sp2.
>> >> >> >>
>> >> >> >> "Cal Bear '66" wrote:
>> >> >> >>
>> >> >> >> > New Kodak EasyShare Software (ver. 6.4) Available Today
>> >> >> >> >
>> >> >> >> > http://kodak.com/eknec/PageQuerier.j...q-locale=en_US
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > I Bleed Blue and Gold
>> >> >> >> > GO BEARS!
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >>
>> >>
>> >>
>>
>>

PuppyFeet

Thank you for such detailed instructions, your time and help is appreciated.
The problem turned out to be the need for a file called microsoft installer
3.1. Once this was installed and the system rebooted I was able to run the
modify feature on the easyshare software and load the printer drivers. I
then followed your suggestions on the firmware but what I had was newer than
what the web site offered. Thanks for all your help but problem is now
resolved and everything is working correctly.

"Cal Bear '66" wrote:

> The firmware update is for the PRINTER not the camera.
>
> When you downloaded the DRIVER, did you look for the install_easyshare.exe
> and double click it to run the installation procedure.
>
> Here is the link for the XP firmware and printer driver updates:
>
> http://www.kodak.com/global/en/servi...oadLanguage=en
>
> Download the file onto your computer.
>
> Locate and double-click the install_easyshare.exe file to begin the
> installation.
>
> NOTE: During this installation, only the drivers install, not EASYSHARE
> Software.
>
> When the Setup Wizard screen appears, click Next.
>
> Select Modify, and click Next.
>
> When the Custom Setup screen appears, verify that Up-to-date is selected for
> Kodak EasyShare printer dock or photo printer, and click Next.
>
> When the Ready to modify the program screen appears, click Next. When the
> installation is done, a Congratulations, the software is now installed message
> appears
> .
> If you have a Printer Dock Plus Series 3 or Photo Printer 500, visit the APPLE
> Web site and download BONJOUR Software free of charge.
> NOTE: You must install BONJOUR Software on your computer before you can use your
> printer as a wireless device.
>
>
>
> I Bleed Blue and Gold
> GO BEARS!
>
>
> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> news:136D4256-9938-4C7B-8930-6CDBD40B6B18@microsoft.com...
> > may work with Vista but I'm running xp. I've already done this but it
> > downloads the drivers into a .cab file. XP is looking for a .inf file and
> > don't know how to make xp understand. had no problem loading the firmware
> > onto the camera but it didn't help the pc to printer problem. I purchased a
> > 2 mg usb memory card, can load the pictures onto this and plug it into the
> > printer, it's a workable work around. I give up for now, thanks for the help.
> >
> > "Cal Bear '66" wrote:
> >
> >> You can download and install printer drivers AND a FIRMWARE upgrade that will
> >> enable you to print from the Kodak G600 -- both updates will be necessary for
> >> you to print to the G600 from within Vista:
> >>
> >> http://www.kodak.com/global/en/servi...l?pq-path=9367
> >>
> >> Please read and follow the instructions TO THE LETTER (especially the
> >> firmware
> >> upgrade).
> >>
> >>
> >> I Bleed Blue and Gold
> >> GO BEARS!
> >>
> >>
> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> news:3725D7C2-35A7-4160-93DA-5739479E7079@microsoft.com...
> >> > model # is g600. nifty little printer if you want to print from your
> >> > camera
> >> > but would really like to print from the pc and avoid the easyshare software
> >> > if possible. great camera, just didn't do the research and sales people
> >> > didn't enlighten me about needing a docking station to recharge the camera
> >> > batteries.. or that the easyshare software was such a pain. I have
> >> > alternate software but want to use the printing option. thanks for your
> >> > help, kodak is useless.
> >> >
> >> > "Cal Bear '66" wrote:
> >> >
> >> >> What is the model number of your Kodak printer dock?
> >> >>
> >> >>
> >> >> I Bleed Blue and Gold
> >> >> GO BEARS!
> >> >>
> >> >>
> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> >> news:469D97F6-35C9-4E45-ADFB-C5B9A70618DE@microsoft.com...
> >> >> >I have pictures loaded on my pc and want to send them to the printer dock
> >> >> >but
> >> >> > the pc can't find the .inf file so the printer dock is not an option to
> >> >> > print
> >> >> > to.
> >> >> >
> >> >> > "Ryka" wrote:
> >> >> >
> >> >> >> Okay, I'll bite - why would you need to send pictures "back to the
> >> >> >> camera
> >> >> >> dock"? Do you mean you removed pictures from the camera after
> >> >> >> downloading
> >> >> >> them onto Easy Share? Or, are you attempting to download other pictures
> >> >> >> to
> >> >> >> your camera?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> >> >> news:95B67FE3-EA5A-49BC-9BD4-8650F0AA94F0@microsoft.com...
> >> >> >> > you guys rock.. thanks to all the great suggestions I was finally
> >> >> >> > able
> >> >> >> > to
> >> >> >> > load the EasyShare software. I'm now able to load my pictures
> >> >> >> > directly
> >> >> >> > from
> >> >> >> > the camera but still can't send pictures back to the printer dock but
> >> >> >> > it's
> >> >> >> > progress. I'll keep reading, you guys are great!
> >> >> >> >
> >> >> >> > "PuppyFeet" wrote:
> >> >> >> >
> >> >> >> >> any suggestion on how to get this software to load? it stalls at
> >> >> >> >> 93%
> >> >> >> >> which
> >> >> >> >> leaves off the printer dock & camera drivers. I've removed and
> >> >> >> >> installed
> >> >> >> >> too
> >> >> >> >> many times, it won't load. Can't figure out what is keeping these
> >> >> >> >> drivers
> >> >> >> >> from loading. Kodak's only answer is to download the latest
> >> >> >> >> software
> >> >> >> >> or
> >> >> >> >> load
> >> >> >> >> it in safe mode. They seem to be clueless. I'm running xp w/sp2.
> >> >> >> >>
> >> >> >> >> "Cal Bear '66" wrote:
> >> >> >> >>
> >> >> >> >> > New Kodak EasyShare Software (ver. 6.4) Available Today
> >> >> >> >> >
> >> >> >> >> > http://kodak.com/eknec/PageQuerier.j...q-locale=en_US
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > I Bleed Blue and Gold
> >> >> >> >> > GO BEARS!
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >>
> >> >>
> >> >>
> >>
> >>
>
>

PuppyFeet

Thank you for such detailed instructions, your time and help is appreciated.
The problem turned out to be the need for a file called microsoft installer
3.1. Once this was installed and the system rebooted I was able to run the
modify feature on the easyshare software and load the printer drivers. I
then followed your suggestions on the firmware but what I had was newer than
what the web site offered. Thanks for all your help but problem is now
resolved and everything is working correctly.

"Cal Bear '66" wrote:

> The firmware update is for the PRINTER not the camera.
>
> When you downloaded the DRIVER, did you look for the install_easyshare.exe
> and double click it to run the installation procedure.
>
> Here is the link for the XP firmware and printer driver updates:
>
> http://www.kodak.com/global/en/servi...oadLanguage=en
>
> Download the file onto your computer.
>
> Locate and double-click the install_easyshare.exe file to begin the
> installation.
>
> NOTE: During this installation, only the drivers install, not EASYSHARE
> Software.
>
> When the Setup Wizard screen appears, click Next.
>
> Select Modify, and click Next.
>
> When the Custom Setup screen appears, verify that Up-to-date is selected for
> Kodak EasyShare printer dock or photo printer, and click Next.
>
> When the Ready to modify the program screen appears, click Next. When the
> installation is done, a Congratulations, the software is now installed message
> appears
> .
> If you have a Printer Dock Plus Series 3 or Photo Printer 500, visit the APPLE
> Web site and download BONJOUR Software free of charge.
> NOTE: You must install BONJOUR Software on your computer before you can use your
> printer as a wireless device.
>
>
>
> I Bleed Blue and Gold
> GO BEARS!
>
>
> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> news:136D4256-9938-4C7B-8930-6CDBD40B6B18@microsoft.com...
> > may work with Vista but I'm running xp. I've already done this but it
> > downloads the drivers into a .cab file. XP is looking for a .inf file and
> > don't know how to make xp understand. had no problem loading the firmware
> > onto the camera but it didn't help the pc to printer problem. I purchased a
> > 2 mg usb memory card, can load the pictures onto this and plug it into the
> > printer, it's a workable work around. I give up for now, thanks for the help.
> >
> > "Cal Bear '66" wrote:
> >
> >> You can download and install printer drivers AND a FIRMWARE upgrade that will
> >> enable you to print from the Kodak G600 -- both updates will be necessary for
> >> you to print to the G600 from within Vista:
> >>
> >> http://www.kodak.com/global/en/servi...l?pq-path=9367
> >>
> >> Please read and follow the instructions TO THE LETTER (especially the
> >> firmware
> >> upgrade).
> >>
> >>
> >> I Bleed Blue and Gold
> >> GO BEARS!
> >>
> >>
> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> news:3725D7C2-35A7-4160-93DA-5739479E7079@microsoft.com...
> >> > model # is g600. nifty little printer if you want to print from your
> >> > camera
> >> > but would really like to print from the pc and avoid the easyshare software
> >> > if possible. great camera, just didn't do the research and sales people
> >> > didn't enlighten me about needing a docking station to recharge the camera
> >> > batteries.. or that the easyshare software was such a pain. I have
> >> > alternate software but want to use the printing option. thanks for your
> >> > help, kodak is useless.
> >> >
> >> > "Cal Bear '66" wrote:
> >> >
> >> >> What is the model number of your Kodak printer dock?
> >> >>
> >> >>
> >> >> I Bleed Blue and Gold
> >> >> GO BEARS!
> >> >>
> >> >>
> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> >> news:469D97F6-35C9-4E45-ADFB-C5B9A70618DE@microsoft.com...
> >> >> >I have pictures loaded on my pc and want to send them to the printer dock
> >> >> >but
> >> >> > the pc can't find the .inf file so the printer dock is not an option to
> >> >> > print
> >> >> > to.
> >> >> >
> >> >> > "Ryka" wrote:
> >> >> >
> >> >> >> Okay, I'll bite - why would you need to send pictures "back to the
> >> >> >> camera
> >> >> >> dock"? Do you mean you removed pictures from the camera after
> >> >> >> downloading
> >> >> >> them onto Easy Share? Or, are you attempting to download other pictures
> >> >> >> to
> >> >> >> your camera?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> >> >> news:95B67FE3-EA5A-49BC-9BD4-8650F0AA94F0@microsoft.com...
> >> >> >> > you guys rock.. thanks to all the great suggestions I was finally
> >> >> >> > able
> >> >> >> > to
> >> >> >> > load the EasyShare software. I'm now able to load my pictures
> >> >> >> > directly
> >> >> >> > from
> >> >> >> > the camera but still can't send pictures back to the printer dock but
> >> >> >> > it's
> >> >> >> > progress. I'll keep reading, you guys are great!
> >> >> >> >
> >> >> >> > "PuppyFeet" wrote:
> >> >> >> >
> >> >> >> >> any suggestion on how to get this software to load? it stalls at
> >> >> >> >> 93%
> >> >> >> >> which
> >> >> >> >> leaves off the printer dock & camera drivers. I've removed and
> >> >> >> >> installed
> >> >> >> >> too
> >> >> >> >> many times, it won't load. Can't figure out what is keeping these
> >> >> >> >> drivers
> >> >> >> >> from loading. Kodak's only answer is to download the latest
> >> >> >> >> software
> >> >> >> >> or
> >> >> >> >> load
> >> >> >> >> it in safe mode. They seem to be clueless. I'm running xp w/sp2.
> >> >> >> >>
> >> >> >> >> "Cal Bear '66" wrote:
> >> >> >> >>
> >> >> >> >> > New Kodak EasyShare Software (ver. 6.4) Available Today
> >> >> >> >> >
> >> >> >> >> > http://kodak.com/eknec/PageQuerier.j...q-locale=en_US
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > I Bleed Blue and Gold
> >> >> >> >> > GO BEARS!
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >>
> >> >>
> >> >>
> >>
> >>
>
>

PuppyFeet

Thank you for such detailed instructions, your time and help is appreciated.
The problem turned out to be the need for a file called microsoft installer
3.1. Once this was installed and the system rebooted I was able to run the
modify feature on the easyshare software and load the printer drivers. I
then followed your suggestions on the firmware but what I had was newer than
what the web site offered. Thanks for all your help but problem is now
resolved and everything is working correctly.

"Cal Bear '66" wrote:

> The firmware update is for the PRINTER not the camera.
>
> When you downloaded the DRIVER, did you look for the install_easyshare.exe
> and double click it to run the installation procedure.
>
> Here is the link for the XP firmware and printer driver updates:
>
> http://www.kodak.com/global/en/servi...oadLanguage=en
>
> Download the file onto your computer.
>
> Locate and double-click the install_easyshare.exe file to begin the
> installation.
>
> NOTE: During this installation, only the drivers install, not EASYSHARE
> Software.
>
> When the Setup Wizard screen appears, click Next.
>
> Select Modify, and click Next.
>
> When the Custom Setup screen appears, verify that Up-to-date is selected for
> Kodak EasyShare printer dock or photo printer, and click Next.
>
> When the Ready to modify the program screen appears, click Next. When the
> installation is done, a Congratulations, the software is now installed message
> appears
> .
> If you have a Printer Dock Plus Series 3 or Photo Printer 500, visit the APPLE
> Web site and download BONJOUR Software free of charge.
> NOTE: You must install BONJOUR Software on your computer before you can use your
> printer as a wireless device.
>
>
>
> I Bleed Blue and Gold
> GO BEARS!
>
>
> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> news:136D4256-9938-4C7B-8930-6CDBD40B6B18@microsoft.com...
> > may work with Vista but I'm running xp. I've already done this but it
> > downloads the drivers into a .cab file. XP is looking for a .inf file and
> > don't know how to make xp understand. had no problem loading the firmware
> > onto the camera but it didn't help the pc to printer problem. I purchased a
> > 2 mg usb memory card, can load the pictures onto this and plug it into the
> > printer, it's a workable work around. I give up for now, thanks for the help.
> >
> > "Cal Bear '66" wrote:
> >
> >> You can download and install printer drivers AND a FIRMWARE upgrade that will
> >> enable you to print from the Kodak G600 -- both updates will be necessary for
> >> you to print to the G600 from within Vista:
> >>
> >> http://www.kodak.com/global/en/servi...l?pq-path=9367
> >>
> >> Please read and follow the instructions TO THE LETTER (especially the
> >> firmware
> >> upgrade).
> >>
> >>
> >> I Bleed Blue and Gold
> >> GO BEARS!
> >>
> >>
> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> news:3725D7C2-35A7-4160-93DA-5739479E7079@microsoft.com...
> >> > model # is g600. nifty little printer if you want to print from your
> >> > camera
> >> > but would really like to print from the pc and avoid the easyshare software
> >> > if possible. great camera, just didn't do the research and sales people
> >> > didn't enlighten me about needing a docking station to recharge the camera
> >> > batteries.. or that the easyshare software was such a pain. I have
> >> > alternate software but want to use the printing option. thanks for your
> >> > help, kodak is useless.
> >> >
> >> > "Cal Bear '66" wrote:
> >> >
> >> >> What is the model number of your Kodak printer dock?
> >> >>
> >> >>
> >> >> I Bleed Blue and Gold
> >> >> GO BEARS!
> >> >>
> >> >>
> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> >> news:469D97F6-35C9-4E45-ADFB-C5B9A70618DE@microsoft.com...
> >> >> >I have pictures loaded on my pc and want to send them to the printer dock
> >> >> >but
> >> >> > the pc can't find the .inf file so the printer dock is not an option to
> >> >> > print
> >> >> > to.
> >> >> >
> >> >> > "Ryka" wrote:
> >> >> >
> >> >> >> Okay, I'll bite - why would you need to send pictures "back to the
> >> >> >> camera
> >> >> >> dock"? Do you mean you removed pictures from the camera after
> >> >> >> downloading
> >> >> >> them onto Easy Share? Or, are you attempting to download other pictures
> >> >> >> to
> >> >> >> your camera?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> "PuppyFeet" <PuppyFeet@discussions.microsoft.com> wrote in message
> >> >> >> news:95B67FE3-EA5A-49BC-9BD4-8650F0AA94F0@microsoft.com...
> >> >> >> > you guys rock.. thanks to all the great suggestions I was finally
> >> >> >> > able
> >> >> >> > to
> >> >> >> > load the EasyShare software. I'm now able to load my pictures
> >> >> >> > directly
> >> >> >> > from
> >> >> >> > the camera but still can't send pictures back to the printer dock but
> >> >> >> > it's
> >> >> >> > progress. I'll keep reading, you guys are great!
> >> >> >> >
> >> >> >> > "PuppyFeet" wrote:
> >> >> >> >
> >> >> >> >> any suggestion on how to get this software to load? it stalls at
> >> >> >> >> 93%
> >> >> >> >> which
> >> >> >> >> leaves off the printer dock & camera drivers. I've removed and
> >> >> >> >> installed
> >> >> >> >> too
> >> >> >> >> many times, it won't load. Can't figure out what is keeping these
> >> >> >> >> drivers
> >> >> >> >> from loading. Kodak's only answer is to download the latest
> >> >> >> >> software
> >> >> >> >> or
> >> >> >> >> load
> >> >> >> >> it in safe mode. They seem to be clueless. I'm running xp w/sp2.
> >> >> >> >>
> >> >> >> >> "Cal Bear '66" wrote:
> >> >> >> >>
> >> >> >> >> > New Kodak EasyShare Software (ver. 6.4) Available Today
> >> >> >> >> >
> >> >> >> >> > http://kodak.com/eknec/PageQuerier.j...q-locale=en_US
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > I Bleed Blue and Gold
> >> >> >> >> > GO BEARS!
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >>
> >> >>
> >> >>
> >>
> >>
>
>

gmramirez

I am trying to install a wireless card on my Easyshare Printer Dock Plus
Series 3 but I need to configure my ip IP adreess and my router address
before I start using the wireless card. Now there is suppose to be a
folder called "Kodak wireless printer setup" inside my Kodak folder but
is not there. I am using Easyshare software 6.4 and Vista 64. Any help
will be appreciated. Thanks.


--
gmramirez
------------------------------------------------------------------------
gmramirez's Profile: http://forums.techarena.in/member.php?userid=38933
View this thread: http://forums.techarena.in/showthread.php?t=823944

http://forums.techarena.in

Diane

I have XP pentium2, trying to load easy share6.4 for a solid day. I
called Kodak and they even gave up . I have no dock, I have loaded ,
unloaded till I am blue. I even downloaded a fix called clear
utility, it says click on the arrow. No arrow available or option.

I get straight from the git go , my desktop needs small fonts. I go to
settings and normal is my only option for fonts.

thanks for any help!

I had a old kodak easy share but its broken. I liked it.


--
Diane
------------------------------------------------------------------------
Diane's Profile: http://forums.techarena.in/member.php?userid=39611
View this thread: http://forums.techarena.in/showthread.php?t=823951

http://forums.techarena.in