Movie Maker can not publish movie

Jags

I have tried un-checking all the items in compatability list, in both MM 6
and MM2.6, and tried with a .bmp file...but still i am getting the same
error...
Whats wrong with the Movie Maker on my system?? I despiratly looking for a
solution...
Thanks for the help...

"PapaJohn" wrote:

> try unchecking all the line items in your MM6 and/or MM2.6 compatibility
> list.... Tools > Options > Compatibility
>
> then try again with the single BMP
> --
> website references are to
>
> PapaJohn (MVP)
>
>
> "Jags" <Jags@discussions.microsoft.com> wrote in message
> news:50E8D7C7-14FE-4B10-960C-4A0F8E4BDCF2@microsoft.com...
> > Can any one help on this....Pleaseeeeeeeeeeeee
> >
> > "Jags" wrote:
> >
> >> Once again...
> >> I have tried with a BMP image file, and got the same error...then
> >> Downloaded MM2.6 from Microsoft website and installed, then tried to make
> >> a
> >> movie with 3 mpeg videos, then got the same error even in MM2.6 also...
> >> I am now having MM6(one came with Vista) and MM2.6...both are not working
> >>
> >>
> >> Your help much appreciated...
> >> Thanks and Regards..
> >> Jagadeesh.K
> >>
> >> "PapaJohn" wrote:
> >>
> >> > Some Movie Maker users have issues with JPEG image files.... a BMP is a
> >> > better test.
> >> >
> >> > You can't remove Movie Maker from Vista or XP... but you can reinstall
> >> > over
> >> > the existing setup. I haven't done any re-installs in Vista but I'd
> >> > expect
> >> > it to be pretty similar to doing MM2.1 in XP, so the Setup Movie Maker
> >> > >
> >> > MM2.1 page of my website might help.
> >> >
> >> > --
> >> > website references are to
> >> >
> >> > PapaJohn
> >> >
> >> >
> >> > "Jags" <> wrote in message
> >> > news:...
> >> > >I have tried to publish with a single JPEG image...but i am getting
> >> > >the
> >> > >same
> >> > > error.
> >> > > I heard that we can not remove MovieMaker from Vista. Is this really
> >> > > possible??
> >> > >
> >> > > "PapaJohn" wrote:
> >> > >
> >> > >> can you save a single clip like a BMP image file to a wmv?? if not,
> >> > >> then
> >> > >> you
> >> > >> probably need to fix or reinstall Movie Maker...
> >> > >> --
> >> > >> website references are to
> >> > >>
> >> > >> PapaJohn
> >> > >>
> >> > >>
> >> > >> "Jags" <> wrote in message
> >> > >> news:...
> >> > >> > Thanks for the reply..
> >> > >> > I have gone through the article(huge one)...It has may reasons for
> >> > >> > the
> >> > >> > problem and obviously many solutuins...but i could not find out
> >> > >> > what is
> >> > >> > suitable for my problem...i have tried increasing the Virtual
> >> > >> > memory,
> >> > >> > but
> >> > >> > still same problem....
> >> > >> > can you suggest any other soultion for the problem i have given
> >> > >> > below??
> >> > >> > Thanks and Regards...
> >> > >> >
> >> > >> > "PapaJohn" wrote:
> >> > >> >
> >> > >> >> check my website's Problem Solving > Can't Save a Movie page
> >> > >> >>
> >> > >> >> --
> >> > >> >> website references are to
> >> > >> >>
> >> > >> >> PapaJohn
> >> > >> >>
> >> > >> >>
> >> > >> >> "Jags" <> wrote in message
> >> > >> >> news:...
> >> > >> >> > can anyone help on the below issue??
> >> > >> >> >
> >> > >> >> > "Jags" wrote:
> >> > >> >> >
> >> > >> >> >> Hi,
> >> > >> >> >> I am using Vista Home Premium. I have created a movie with
> >> > >> >> >> Movie
> >> > >> >> >> Maker,
> >> > >> >> >> and
> >> > >> >> >> when i try to publish the movie with the default settings, its
> >> > >> >> >> giving
> >> > >> >> >> an
> >> > >> >> >> error message: "Movie Maker can not publish the movie. The
> >> > >> >> >> source
> >> > >> >> >> files
> >> > >> >> >> may
> >> > >> >> >> not be available, or the disk space is not enouth...". I have
> >> > >> >> >> my
> >> > >> >> >> source
> >> > >> >> >> files
> >> > >> >> >> in the same path, 50GB of free disk space is there. But its
> >> > >> >> >> not
> >> > >> >> >> publishing
> >> > >> >> >> the movie. But, if i select the third option the select bit
> >> > >> >> >> rate
> >> > >> >> >> window
> >> > >> >> >> ie.,
> >> > >> >> >> AVI-DV in the dropdown list, the publishing is successfull.
> >> > >> >> >> But the
> >> > >> >> >> .AVI
> >> > >> >> >> file
> >> > >> >> >> created is huge in size.
> >> > >> >> >> Can anyone tell me what is wrong with movie maker, and why it
> >> > >> >> >> is
> >> > >> >> >> not
> >> > >> >> >> able
> >> > >> >> >> to
> >> > >> >> >> publish the movie with default settings.
> >> > >> >> >> Thanks and Regards...
> >> > >> >>
> >> > >> >>
> >> > >> >>
> >> > >>
> >> > >>
> >> > >>
> >> >
> >> >
> >> >
>
>
>

Jags

Any guesses??

"Jags" wrote:

> I have tried un-checking all the items in compatability list, in both MM 6
> and MM2.6, and tried with a .bmp file...but still i am getting the same
> error...
> Whats wrong with the Movie Maker on my system?? I despiratly looking for a
> solution...
> Thanks for the help...
>
> "PapaJohn" wrote:
>
> > try unchecking all the line items in your MM6 and/or MM2.6 compatibility
> > list.... Tools > Options > Compatibility
> >
> > then try again with the single BMP
> > --
> > website references are to
> >
> > PapaJohn (MVP)
> >
> >
> > "Jags" <Jags@discussions.microsoft.com> wrote in message
> > news:50E8D7C7-14FE-4B10-960C-4A0F8E4BDCF2@microsoft.com...
> > > Can any one help on this....Pleaseeeeeeeeeeeee
> > >
> > > "Jags" wrote:
> > >
> > >> Once again...
> > >> I have tried with a BMP image file, and got the same error...then
> > >> Downloaded MM2.6 from Microsoft website and installed, then tried to make
> > >> a
> > >> movie with 3 mpeg videos, then got the same error even in MM2.6 also...
> > >> I am now having MM6(one came with Vista) and MM2.6...both are not working
> > >>
> > >>
> > >> Your help much appreciated...
> > >> Thanks and Regards..
> > >> Jagadeesh.K
> > >>
> > >> "PapaJohn" wrote:
> > >>
> > >> > Some Movie Maker users have issues with JPEG image files.... a BMP is a
> > >> > better test.
> > >> >
> > >> > You can't remove Movie Maker from Vista or XP... but you can reinstall
> > >> > over
> > >> > the existing setup. I haven't done any re-installs in Vista but I'd
> > >> > expect
> > >> > it to be pretty similar to doing MM2.1 in XP, so the Setup Movie Maker
> > >> > >
> > >> > MM2.1 page of my website might help.
> > >> >
> > >> > --
> > >> > website references are to
> > >> >
> > >> > PapaJohn
> > >> >
> > >> >
> > >> > "Jags" <> wrote in message
> > >> > news:...
> > >> > >I have tried to publish with a single JPEG image...but i am getting
> > >> > >the
> > >> > >same
> > >> > > error.
> > >> > > I heard that we can not remove MovieMaker from Vista. Is this really
> > >> > > possible??
> > >> > >
> > >> > > "PapaJohn" wrote:
> > >> > >
> > >> > >> can you save a single clip like a BMP image file to a wmv?? if not,
> > >> > >> then
> > >> > >> you
> > >> > >> probably need to fix or reinstall Movie Maker...
> > >> > >> --
> > >> > >> website references are to
> > >> > >>
> > >> > >> PapaJohn
> > >> > >>
> > >> > >>
> > >> > >> "Jags" <> wrote in message
> > >> > >> news:...
> > >> > >> > Thanks for the reply..
> > >> > >> > I have gone through the article(huge one)...It has may reasons for
> > >> > >> > the
> > >> > >> > problem and obviously many solutuins...but i could not find out
> > >> > >> > what is
> > >> > >> > suitable for my problem...i have tried increasing the Virtual
> > >> > >> > memory,
> > >> > >> > but
> > >> > >> > still same problem....
> > >> > >> > can you suggest any other soultion for the problem i have given
> > >> > >> > below??
> > >> > >> > Thanks and Regards...
> > >> > >> >
> > >> > >> > "PapaJohn" wrote:
> > >> > >> >
> > >> > >> >> check my website's Problem Solving > Can't Save a Movie page
> > >> > >> >>
> > >> > >> >> --
> > >> > >> >> website references are to
> > >> > >> >>
> > >> > >> >> PapaJohn
> > >> > >> >>
> > >> > >> >>
> > >> > >> >> "Jags" <> wrote in message
> > >> > >> >> news:...
> > >> > >> >> > can anyone help on the below issue??
> > >> > >> >> >
> > >> > >> >> > "Jags" wrote:
> > >> > >> >> >
> > >> > >> >> >> Hi,
> > >> > >> >> >> I am using Vista Home Premium. I have created a movie with
> > >> > >> >> >> Movie
> > >> > >> >> >> Maker,
> > >> > >> >> >> and
> > >> > >> >> >> when i try to publish the movie with the default settings, its
> > >> > >> >> >> giving
> > >> > >> >> >> an
> > >> > >> >> >> error message: "Movie Maker can not publish the movie. The
> > >> > >> >> >> source
> > >> > >> >> >> files
> > >> > >> >> >> may
> > >> > >> >> >> not be available, or the disk space is not enouth...". I have
> > >> > >> >> >> my
> > >> > >> >> >> source
> > >> > >> >> >> files
> > >> > >> >> >> in the same path, 50GB of free disk space is there. But its
> > >> > >> >> >> not
> > >> > >> >> >> publishing
> > >> > >> >> >> the movie. But, if i select the third option the select bit
> > >> > >> >> >> rate
> > >> > >> >> >> window
> > >> > >> >> >> ie.,
> > >> > >> >> >> AVI-DV in the dropdown list, the publishing is successfull.
> > >> > >> >> >> But the
> > >> > >> >> >> .AVI
> > >> > >> >> >> file
> > >> > >> >> >> created is huge in size.
> > >> > >> >> >> Can anyone tell me what is wrong with movie maker, and why it
> > >> > >> >> >> is
> > >> > >> >> >> not
> > >> > >> >> >> able
> > >> > >> >> >> to
> > >> > >> >> >> publish the movie with default settings.
> > >> > >> >> >> Thanks and Regards...
> > >> > >> >>
> > >> > >> >>
> > >> > >> >>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> >
> > >> >
> > >> >
> >
> >
> >

PapaJohn

Check your Movie Maker program files against the lists I show on my
website's Setup Movie Maker > Vista-MM6 page...

If they align, re-register each of the DLLs... if not, refresh them with
files from your backup set... see the Setup Movie Maker > XP-MM2.1 page for
info about re-registering a DLL...

site references are to

PapaJohn (MVP)


"Jags" <> wrote in message
news:...
> Any guesses??
>
> "Jags" wrote:
>
>> I have tried un-checking all the items in compatability list, in both MM
>> 6
>> and MM2.6, and tried with a .bmp file...but still i am getting the same
>> error...
>> Whats wrong with the Movie Maker on my system?? I despiratly looking for
>> a
>> solution...
>> Thanks for the help...
>>
>> "PapaJohn" wrote:
>>
>> > try unchecking all the line items in your MM6 and/or MM2.6
>> > compatibility
>> > list.... Tools > Options > Compatibility
>> >
>> > then try again with the single BMP
>> > --
>> > website references are to
>> >
>> > PapaJohn (MVP)
>> >
>> >
>> > "Jags" <Jags@discussions.microsoft.com> wrote in message
>> > news:50E8D7C7-14FE-4B10-960C-4A0F8E4BDCF2@microsoft.com...
>> > > Can any one help on this....Pleaseeeeeeeeeeeee
>> > >
>> > > "Jags" wrote:
>> > >
>> > >> Once again...
>> > >> I have tried with a BMP image file, and got the same error...then
>> > >> Downloaded MM2.6 from Microsoft website and installed, then tried to
>> > >> make
>> > >> a
>> > >> movie with 3 mpeg videos, then got the same error even in MM2.6
>> > >> also...
>> > >> I am now having MM6(one came with Vista) and MM2.6...both are not
>> > >> working
>> > >>
>> > >>
>> > >> Your help much appreciated...
>> > >> Thanks and Regards..
>> > >> Jagadeesh.K
>> > >>
>> > >> "PapaJohn" wrote:
>> > >>
>> > >> > Some Movie Maker users have issues with JPEG image files.... a BMP
>> > >> > is a
>> > >> > better test.
>> > >> >
>> > >> > You can't remove Movie Maker from Vista or XP... but you can
>> > >> > reinstall
>> > >> > over
>> > >> > the existing setup. I haven't done any re-installs in Vista but
>> > >> > I'd
>> > >> > expect
>> > >> > it to be pretty similar to doing MM2.1 in XP, so the Setup Movie
>> > >> > Maker
>> > >> > >
>> > >> > MM2.1 page of my website might help.
>> > >> >
>> > >> > --
>> > >> > website references are to
>> > >> >
>> > >> > PapaJohn
>> > >> >
>> > >> >
>> > >> > "Jags" <> wrote in message
>> > >> > news:...
>> > >> > >I have tried to publish with a single JPEG image...but i am
>> > >> > >getting
>> > >> > >the
>> > >> > >same
>> > >> > > error.
>> > >> > > I heard that we can not remove MovieMaker from Vista. Is this
>> > >> > > really
>> > >> > > possible??
>> > >> > >
>> > >> > > "PapaJohn" wrote:
>> > >> > >
>> > >> > >> can you save a single clip like a BMP image file to a wmv?? if
>> > >> > >> not,
>> > >> > >> then
>> > >> > >> you
>> > >> > >> probably need to fix or reinstall Movie Maker...
>> > >> > >> --
>> > >> > >> website references are to
>> > >> > >>
>> > >> > >> PapaJohn
>> > >> > >>
>> > >> > >>
>> > >> > >> "Jags" <> wrote in message
>> > >> > >> news:...
>> > >> > >> > Thanks for the reply..
>> > >> > >> > I have gone through the article(huge one)...It has may
>> > >> > >> > reasons for
>> > >> > >> > the
>> > >> > >> > problem and obviously many solutuins...but i could not find
>> > >> > >> > out
>> > >> > >> > what is
>> > >> > >> > suitable for my problem...i have tried increasing the Virtual
>> > >> > >> > memory,
>> > >> > >> > but
>> > >> > >> > still same problem....
>> > >> > >> > can you suggest any other soultion for the problem i have
>> > >> > >> > given
>> > >> > >> > below??
>> > >> > >> > Thanks and Regards...
>> > >> > >> >
>> > >> > >> > "PapaJohn" wrote:
>> > >> > >> >
>> > >> > >> >> check my website's Problem Solving > Can't Save a Movie page
>> > >> > >> >>
>> > >> > >> >> --
>> > >> > >> >> website references are to
>> > >> > >> >>
>> > >> > >> >> PapaJohn
>> > >> > >> >>
>> > >> > >> >>
>> > >> > >> >> "Jags" <> wrote in message
>> > >> > >> >> news:...
>> > >> > >> >> > can anyone help on the below issue??
>> > >> > >> >> >
>> > >> > >> >> > "Jags" wrote:
>> > >> > >> >> >
>> > >> > >> >> >> Hi,
>> > >> > >> >> >> I am using Vista Home Premium. I have created a movie
>> > >> > >> >> >> with
>> > >> > >> >> >> Movie
>> > >> > >> >> >> Maker,
>> > >> > >> >> >> and
>> > >> > >> >> >> when i try to publish the movie with the default
>> > >> > >> >> >> settings, its
>> > >> > >> >> >> giving
>> > >> > >> >> >> an
>> > >> > >> >> >> error message: "Movie Maker can not publish the movie.
>> > >> > >> >> >> The
>> > >> > >> >> >> source
>> > >> > >> >> >> files
>> > >> > >> >> >> may
>> > >> > >> >> >> not be available, or the disk space is not enouth...". I
>> > >> > >> >> >> have
>> > >> > >> >> >> my
>> > >> > >> >> >> source
>> > >> > >> >> >> files
>> > >> > >> >> >> in the same path, 50GB of free disk space is there. But
>> > >> > >> >> >> its
>> > >> > >> >> >> not
>> > >> > >> >> >> publishing
>> > >> > >> >> >> the movie. But, if i select the third option the select
>> > >> > >> >> >> bit
>> > >> > >> >> >> rate
>> > >> > >> >> >> window
>> > >> > >> >> >> ie.,
>> > >> > >> >> >> AVI-DV in the dropdown list, the publishing is
>> > >> > >> >> >> successfull.
>> > >> > >> >> >> But the
>> > >> > >> >> >> .AVI
>> > >> > >> >> >> file
>> > >> > >> >> >> created is huge in size.
>> > >> > >> >> >> Can anyone tell me what is wrong with movie maker, and
>> > >> > >> >> >> why it
>> > >> > >> >> >> is
>> > >> > >> >> >> not
>> > >> > >> >> >> able
>> > >> > >> >> >> to
>> > >> > >> >> >> publish the movie with default settings.
>> > >> > >> >> >> Thanks and Regards...
>> > >> > >> >>
>> > >> > >> >>
>> > >> > >> >>
>> > >> > >>
>> > >> > >>
>> > >> > >>
>> > >> >
>> > >> >
>> > >> >
>> >
>> >
>> >

Jags

The files and dll are aligned correcly..
i have tried to re-register the dll files..but none of them are
registerd...i have followed the proecess what you have given your website,
but not working...
can you suggest anything on this??

"PapaJohn" wrote:

> Check your Movie Maker program files against the lists I show on my
> website's Setup Movie Maker > Vista-MM6 page...
>
> If they align, re-register each of the DLLs... if not, refresh them with
> files from your backup set... see the Setup Movie Maker > XP-MM2.1 page for
> info about re-registering a DLL...
>
> site references are to
>
> PapaJohn (MVP)
>
>
> "Jags" <> wrote in message
> news:...
> > Any guesses??
> >
> > "Jags" wrote:
> >
> >> I have tried un-checking all the items in compatability list, in both MM
> >> 6
> >> and MM2.6, and tried with a .bmp file...but still i am getting the same
> >> error...
> >> Whats wrong with the Movie Maker on my system?? I despiratly looking for
> >> a
> >> solution...
> >> Thanks for the help...
> >>
> >> "PapaJohn" wrote:
> >>
> >> > try unchecking all the line items in your MM6 and/or MM2.6
> >> > compatibility
> >> > list.... Tools > Options > Compatibility
> >> >
> >> > then try again with the single BMP
> >> > --
> >> > website references are to
> >> >
> >> > PapaJohn (MVP)
> >> >
> >> >
> >> > "Jags" <Jags@discussions.microsoft.com> wrote in message
> >> > news:50E8D7C7-14FE-4B10-960C-4A0F8E4BDCF2@microsoft.com...
> >> > > Can any one help on this....Pleaseeeeeeeeeeeee
> >> > >
> >> > > "Jags" wrote:
> >> > >
> >> > >> Once again...
> >> > >> I have tried with a BMP image file, and got the same error...then
> >> > >> Downloaded MM2.6 from Microsoft website and installed, then tried to
> >> > >> make
> >> > >> a
> >> > >> movie with 3 mpeg videos, then got the same error even in MM2.6
> >> > >> also...
> >> > >> I am now having MM6(one came with Vista) and MM2.6...both are not
> >> > >> working
> >> > >>
> >> > >>
> >> > >> Your help much appreciated...
> >> > >> Thanks and Regards..
> >> > >> Jagadeesh.K
> >> > >>
> >> > >> "PapaJohn" wrote:
> >> > >>
> >> > >> > Some Movie Maker users have issues with JPEG image files.... a BMP
> >> > >> > is a
> >> > >> > better test.
> >> > >> >
> >> > >> > You can't remove Movie Maker from Vista or XP... but you can
> >> > >> > reinstall
> >> > >> > over
> >> > >> > the existing setup. I haven't done any re-installs in Vista but
> >> > >> > I'd
> >> > >> > expect
> >> > >> > it to be pretty similar to doing MM2.1 in XP, so the Setup Movie
> >> > >> > Maker
> >> > >> > >
> >> > >> > MM2.1 page of my website might help.
> >> > >> >
> >> > >> > --
> >> > >> > website references are to
> >> > >> >
> >> > >> > PapaJohn
> >> > >> >
> >> > >> >
> >> > >> > "Jags" <> wrote in message
> >> > >> > news:...
> >> > >> > >I have tried to publish with a single JPEG image...but i am
> >> > >> > >getting
> >> > >> > >the
> >> > >> > >same
> >> > >> > > error.
> >> > >> > > I heard that we can not remove MovieMaker from Vista. Is this
> >> > >> > > really
> >> > >> > > possible??
> >> > >> > >
> >> > >> > > "PapaJohn" wrote:
> >> > >> > >
> >> > >> > >> can you save a single clip like a BMP image file to a wmv?? if
> >> > >> > >> not,
> >> > >> > >> then
> >> > >> > >> you
> >> > >> > >> probably need to fix or reinstall Movie Maker...
> >> > >> > >> --
> >> > >> > >> website references are to
> >> > >> > >>
> >> > >> > >> PapaJohn
> >> > >> > >>
> >> > >> > >>
> >> > >> > >> "Jags" <> wrote in message
> >> > >> > >> news:...
> >> > >> > >> > Thanks for the reply..
> >> > >> > >> > I have gone through the article(huge one)...It has may
> >> > >> > >> > reasons for
> >> > >> > >> > the
> >> > >> > >> > problem and obviously many solutuins...but i could not find
> >> > >> > >> > out
> >> > >> > >> > what is
> >> > >> > >> > suitable for my problem...i have tried increasing the Virtual
> >> > >> > >> > memory,
> >> > >> > >> > but
> >> > >> > >> > still same problem....
> >> > >> > >> > can you suggest any other soultion for the problem i have
> >> > >> > >> > given
> >> > >> > >> > below??
> >> > >> > >> > Thanks and Regards...
> >> > >> > >> >
> >> > >> > >> > "PapaJohn" wrote:
> >> > >> > >> >
> >> > >> > >> >> check my website's Problem Solving > Can't Save a Movie page
> >> > >> > >> >>
> >> > >> > >> >> --
> >> > >> > >> >> website references are to
> >> > >> > >> >>
> >> > >> > >> >> PapaJohn
> >> > >> > >> >>
> >> > >> > >> >>
> >> > >> > >> >> "Jags" <> wrote in message
> >> > >> > >> >> news:...
> >> > >> > >> >> > can anyone help on the below issue??
> >> > >> > >> >> >
> >> > >> > >> >> > "Jags" wrote:
> >> > >> > >> >> >
> >> > >> > >> >> >> Hi,
> >> > >> > >> >> >> I am using Vista Home Premium. I have created a movie
> >> > >> > >> >> >> with
> >> > >> > >> >> >> Movie
> >> > >> > >> >> >> Maker,
> >> > >> > >> >> >> and
> >> > >> > >> >> >> when i try to publish the movie with the default
> >> > >> > >> >> >> settings, its
> >> > >> > >> >> >> giving
> >> > >> > >> >> >> an
> >> > >> > >> >> >> error message: "Movie Maker can not publish the movie.
> >> > >> > >> >> >> The
> >> > >> > >> >> >> source
> >> > >> > >> >> >> files
> >> > >> > >> >> >> may
> >> > >> > >> >> >> not be available, or the disk space is not enouth...". I
> >> > >> > >> >> >> have
> >> > >> > >> >> >> my
> >> > >> > >> >> >> source
> >> > >> > >> >> >> files
> >> > >> > >> >> >> in the same path, 50GB of free disk space is there. But
> >> > >> > >> >> >> its
> >> > >> > >> >> >> not
> >> > >> > >> >> >> publishing
> >> > >> > >> >> >> the movie. But, if i select the third option the select
> >> > >> > >> >> >> bit
> >> > >> > >> >> >> rate
> >> > >> > >> >> >> window
> >> > >> > >> >> >> ie.,
> >> > >> > >> >> >> AVI-DV in the dropdown list, the publishing is
> >> > >> > >> >> >> successfull.
> >> > >> > >> >> >> But the
> >> > >> > >> >> >> .AVI
> >> > >> > >> >> >> file
> >> > >> > >> >> >> created is huge in size.
> >> > >> > >> >> >> Can anyone tell me what is wrong with movie maker, and
> >> > >> > >> >> >> why it
> >> > >> > >> >> >> is
> >> > >> > >> >> >> not
> >> > >> > >> >> >> able
> >> > >> > >> >> >> to
> >> > >> > >> >> >> publish the movie with default settings.
> >> > >> > >> >> >> Thanks and Regards...
> >> > >> > >> >>
> >> > >> > >> >>
> >> > >> > >> >>
> >> > >> > >>
> >> > >> > >>
> >> > >> > >>
> >> > >> >
> >> > >> >
> >> > >> >
> >> >
> >> >
> >> >
>
>
>

Jags

How can resolve this issue??

"Jags" wrote:

> The files and dll are aligned correcly..
> i have tried to re-register the dll files..but none of them are
> registerd...i have followed the proecess what you have given your website,
> but not working...
> can you suggest anything on this??
>
> "PapaJohn" wrote:
>
> > Check your Movie Maker program files against the lists I show on my
> > website's Setup Movie Maker > Vista-MM6 page...
> >
> > If they align, re-register each of the DLLs... if not, refresh them with
> > files from your backup set... see the Setup Movie Maker > XP-MM2.1 page for
> > info about re-registering a DLL...
> >
> > site references are to
> >
> > PapaJohn (MVP)
> >
> >
> > "Jags" <> wrote in message
> > news:...
> > > Any guesses??
> > >
> > > "Jags" wrote:
> > >
> > >> I have tried un-checking all the items in compatability list, in both MM
> > >> 6
> > >> and MM2.6, and tried with a .bmp file...but still i am getting the same
> > >> error...
> > >> Whats wrong with the Movie Maker on my system?? I despiratly looking for
> > >> a
> > >> solution...
> > >> Thanks for the help...
> > >>
> > >> "PapaJohn" wrote:
> > >>
> > >> > try unchecking all the line items in your MM6 and/or MM2.6
> > >> > compatibility
> > >> > list.... Tools > Options > Compatibility
> > >> >
> > >> > then try again with the single BMP
> > >> > --
> > >> > website references are to
> > >> >
> > >> > PapaJohn (MVP)
> > >> >
> > >> >
> > >> > "Jags" <Jags@discussions.microsoft.com> wrote in message
> > >> > news:50E8D7C7-14FE-4B10-960C-4A0F8E4BDCF2@microsoft.com...
> > >> > > Can any one help on this....Pleaseeeeeeeeeeeee
> > >> > >
> > >> > > "Jags" wrote:
> > >> > >
> > >> > >> Once again...
> > >> > >> I have tried with a BMP image file, and got the same error...then
> > >> > >> Downloaded MM2.6 from Microsoft website and installed, then tried to
> > >> > >> make
> > >> > >> a
> > >> > >> movie with 3 mpeg videos, then got the same error even in MM2.6
> > >> > >> also...
> > >> > >> I am now having MM6(one came with Vista) and MM2.6...both are not
> > >> > >> working
> > >> > >>
> > >> > >>
> > >> > >> Your help much appreciated...
> > >> > >> Thanks and Regards..
> > >> > >> Jagadeesh.K
> > >> > >>
> > >> > >> "PapaJohn" wrote:
> > >> > >>
> > >> > >> > Some Movie Maker users have issues with JPEG image files.... a BMP
> > >> > >> > is a
> > >> > >> > better test.
> > >> > >> >
> > >> > >> > You can't remove Movie Maker from Vista or XP... but you can
> > >> > >> > reinstall
> > >> > >> > over
> > >> > >> > the existing setup. I haven't done any re-installs in Vista but
> > >> > >> > I'd
> > >> > >> > expect
> > >> > >> > it to be pretty similar to doing MM2.1 in XP, so the Setup Movie
> > >> > >> > Maker
> > >> > >> > >
> > >> > >> > MM2.1 page of my website might help.
> > >> > >> >
> > >> > >> > --
> > >> > >> > website references are to
> > >> > >> >
> > >> > >> > PapaJohn
> > >> > >> >
> > >> > >> >
> > >> > >> > "Jags" <> wrote in message
> > >> > >> > news:...
> > >> > >> > >I have tried to publish with a single JPEG image...but i am
> > >> > >> > >getting
> > >> > >> > >the
> > >> > >> > >same
> > >> > >> > > error.
> > >> > >> > > I heard that we can not remove MovieMaker from Vista. Is this
> > >> > >> > > really
> > >> > >> > > possible??
> > >> > >> > >
> > >> > >> > > "PapaJohn" wrote:
> > >> > >> > >
> > >> > >> > >> can you save a single clip like a BMP image file to a wmv?? if
> > >> > >> > >> not,
> > >> > >> > >> then
> > >> > >> > >> you
> > >> > >> > >> probably need to fix or reinstall Movie Maker...
> > >> > >> > >> --
> > >> > >> > >> website references are to
> > >> > >> > >>
> > >> > >> > >> PapaJohn
> > >> > >> > >>
> > >> > >> > >>
> > >> > >> > >> "Jags" <> wrote in message
> > >> > >> > >> news:...
> > >> > >> > >> > Thanks for the reply..
> > >> > >> > >> > I have gone through the article(huge one)...It has may
> > >> > >> > >> > reasons for
> > >> > >> > >> > the
> > >> > >> > >> > problem and obviously many solutuins...but i could not find
> > >> > >> > >> > out
> > >> > >> > >> > what is
> > >> > >> > >> > suitable for my problem...i have tried increasing the Virtual
> > >> > >> > >> > memory,
> > >> > >> > >> > but
> > >> > >> > >> > still same problem....
> > >> > >> > >> > can you suggest any other soultion for the problem i have
> > >> > >> > >> > given
> > >> > >> > >> > below??
> > >> > >> > >> > Thanks and Regards...
> > >> > >> > >> >
> > >> > >> > >> > "PapaJohn" wrote:
> > >> > >> > >> >
> > >> > >> > >> >> check my website's Problem Solving > Can't Save a Movie page
> > >> > >> > >> >>
> > >> > >> > >> >> --
> > >> > >> > >> >> website references are to
> > >> > >> > >> >>
> > >> > >> > >> >> PapaJohn
> > >> > >> > >> >>
> > >> > >> > >> >>
> > >> > >> > >> >> "Jags" <> wrote in message
> > >> > >> > >> >> news:...
> > >> > >> > >> >> > can anyone help on the below issue??
> > >> > >> > >> >> >
> > >> > >> > >> >> > "Jags" wrote:
> > >> > >> > >> >> >
> > >> > >> > >> >> >> Hi,
> > >> > >> > >> >> >> I am using Vista Home Premium. I have created a movie
> > >> > >> > >> >> >> with
> > >> > >> > >> >> >> Movie
> > >> > >> > >> >> >> Maker,
> > >> > >> > >> >> >> and
> > >> > >> > >> >> >> when i try to publish the movie with the default
> > >> > >> > >> >> >> settings, its
> > >> > >> > >> >> >> giving
> > >> > >> > >> >> >> an
> > >> > >> > >> >> >> error message: "Movie Maker can not publish the movie.
> > >> > >> > >> >> >> The
> > >> > >> > >> >> >> source
> > >> > >> > >> >> >> files
> > >> > >> > >> >> >> may
> > >> > >> > >> >> >> not be available, or the disk space is not enouth...". I
> > >> > >> > >> >> >> have
> > >> > >> > >> >> >> my
> > >> > >> > >> >> >> source
> > >> > >> > >> >> >> files
> > >> > >> > >> >> >> in the same path, 50GB of free disk space is there. But
> > >> > >> > >> >> >> its
> > >> > >> > >> >> >> not
> > >> > >> > >> >> >> publishing
> > >> > >> > >> >> >> the movie. But, if i select the third option the select
> > >> > >> > >> >> >> bit
> > >> > >> > >> >> >> rate
> > >> > >> > >> >> >> window
> > >> > >> > >> >> >> ie.,
> > >> > >> > >> >> >> AVI-DV in the dropdown list, the publishing is
> > >> > >> > >> >> >> successfull.
> > >> > >> > >> >> >> But the
> > >> > >> > >> >> >> .AVI
> > >> > >> > >> >> >> file
> > >> > >> > >> >> >> created is huge in size.
> > >> > >> > >> >> >> Can anyone tell me what is wrong with movie maker, and
> > >> > >> > >> >> >> why it
> > >> > >> > >> >> >> is
> > >> > >> > >> >> >> not
> > >> > >> > >> >> >> able
> > >> > >> > >> >> >> to
> > >> > >> > >> >> >> publish the movie with default settings.
> > >> > >> > >> >> >> Thanks and Regards...
> > >> > >> > >> >>
> > >> > >> > >> >>
> > >> > >> > >> >>
> > >> > >> > >>
> > >> > >> > >>
> > >> > >> > >>
> > >> > >> >
> > >> > >> >
> > >> > >> >
> > >> >
> > >> >
> > >> >
> >
> >
> >

PapaJohn

My website's Problem Solving > Can't Save a Movie page has all of the
issues, resolutions and work-arounds that I know of.... the page started
with XP and Vista has introduced some other issues that I don't know enough
about yet. As I learn I add them...

As you see, it's not always quick, easy or straight-forward.
--
website references are to

PapaJohn (MVP)


"Jags" <> wrote in message
news:...
> How can resolve this issue??
>
> "Jags" wrote:
>
>> The files and dll are aligned correcly..
>> i have tried to re-register the dll files..but none of them are
>> registerd...i have followed the proecess what you have given your
>> website,
>> but not working...
>> can you suggest anything on this??
>>
>> "PapaJohn" wrote:
>>
>> > Check your Movie Maker program files against the lists I show on my
>> > website's Setup Movie Maker > Vista-MM6 page...
>> >
>> > If they align, re-register each of the DLLs... if not, refresh them
>> > with
>> > files from your backup set... see the Setup Movie Maker > XP-MM2.1 page
>> > for
>> > info about re-registering a DLL...
>> >
>> > site references are to
>> >
>> > PapaJohn (MVP)
>> >
>> >
>> > "Jags" <> wrote in message
>> > news:...
>> > > Any guesses??
>> > >
>> > > "Jags" wrote:
>> > >
>> > >> I have tried un-checking all the items in compatability list, in
>> > >> both MM
>> > >> 6
>> > >> and MM2.6, and tried with a .bmp file...but still i am getting the
>> > >> same
>> > >> error...
>> > >> Whats wrong with the Movie Maker on my system?? I despiratly looking
>> > >> for
>> > >> a
>> > >> solution...
>> > >> Thanks for the help...
>> > >>
>> > >> "PapaJohn" wrote:
>> > >>
>> > >> > try unchecking all the line items in your MM6 and/or MM2.6
>> > >> > compatibility
>> > >> > list.... Tools > Options > Compatibility
>> > >> >
>> > >> > then try again with the single BMP
>> > >> > --
>> > >> > website references are to
>> > >> >
>> > >> > PapaJohn (MVP)
>> > >> >
>> > >> >
>> > >> > "Jags" <Jags@discussions.microsoft.com> wrote in message
>> > >> > news:50E8D7C7-14FE-4B10-960C-4A0F8E4BDCF2@microsoft.com...
>> > >> > > Can any one help on this....Pleaseeeeeeeeeeeee
>> > >> > >
>> > >> > > "Jags" wrote:
>> > >> > >
>> > >> > >> Once again...
>> > >> > >> I have tried with a BMP image file, and got the same
>> > >> > >> error...then
>> > >> > >> Downloaded MM2.6 from Microsoft website and installed, then
>> > >> > >> tried to
>> > >> > >> make
>> > >> > >> a
>> > >> > >> movie with 3 mpeg videos, then got the same error even in MM2.6
>> > >> > >> also...
>> > >> > >> I am now having MM6(one came with Vista) and MM2.6...both are
>> > >> > >> not
>> > >> > >> working
>> > >> > >>
>> > >> > >>
>> > >> > >> Your help much appreciated...
>> > >> > >> Thanks and Regards..
>> > >> > >> Jagadeesh.K
>> > >> > >>
>> > >> > >> "PapaJohn" wrote:
>> > >> > >>
>> > >> > >> > Some Movie Maker users have issues with JPEG image files....
>> > >> > >> > a BMP
>> > >> > >> > is a
>> > >> > >> > better test.
>> > >> > >> >
>> > >> > >> > You can't remove Movie Maker from Vista or XP... but you can
>> > >> > >> > reinstall
>> > >> > >> > over
>> > >> > >> > the existing setup. I haven't done any re-installs in Vista
>> > >> > >> > but
>> > >> > >> > I'd
>> > >> > >> > expect
>> > >> > >> > it to be pretty similar to doing MM2.1 in XP, so the Setup
>> > >> > >> > Movie
>> > >> > >> > Maker
>> > >> > >> > >
>> > >> > >> > MM2.1 page of my website might help.
>> > >> > >> >
>> > >> > >> > --
>> > >> > >> > website references are to
>> > >> > >> >
>> > >> > >> > PapaJohn
>> > >> > >> >
>> > >> > >> >
>> > >> > >> > "Jags" <> wrote in message
>> > >> > >> > news:...
>> > >> > >> > >I have tried to publish with a single JPEG image...but i am
>> > >> > >> > >getting
>> > >> > >> > >the
>> > >> > >> > >same
>> > >> > >> > > error.
>> > >> > >> > > I heard that we can not remove MovieMaker from Vista. Is
>> > >> > >> > > this
>> > >> > >> > > really
>> > >> > >> > > possible??
>> > >> > >> > >
>> > >> > >> > > "PapaJohn" wrote:
>> > >> > >> > >
>> > >> > >> > >> can you save a single clip like a BMP image file to a
>> > >> > >> > >> wmv?? if
>> > >> > >> > >> not,
>> > >> > >> > >> then
>> > >> > >> > >> you
>> > >> > >> > >> probably need to fix or reinstall Movie Maker...
>> > >> > >> > >> --
>> > >> > >> > >> website references are to
>> > >> > >> > >>
>> > >> > >> > >> PapaJohn
>> > >> > >> > >>
>> > >> > >> > >>
>> > >> > >> > >> "Jags" <> wrote in message
>> > >> > >> > >> news:...
>> > >> > >> > >> > Thanks for the reply..
>> > >> > >> > >> > I have gone through the article(huge one)...It has may
>> > >> > >> > >> > reasons for
>> > >> > >> > >> > the
>> > >> > >> > >> > problem and obviously many solutuins...but i could not
>> > >> > >> > >> > find
>> > >> > >> > >> > out
>> > >> > >> > >> > what is
>> > >> > >> > >> > suitable for my problem...i have tried increasing the
>> > >> > >> > >> > Virtual
>> > >> > >> > >> > memory,
>> > >> > >> > >> > but
>> > >> > >> > >> > still same problem....
>> > >> > >> > >> > can you suggest any other soultion for the problem i
>> > >> > >> > >> > have
>> > >> > >> > >> > given
>> > >> > >> > >> > below??
>> > >> > >> > >> > Thanks and Regards...
>> > >> > >> > >> >
>> > >> > >> > >> > "PapaJohn" wrote:
>> > >> > >> > >> >
>> > >> > >> > >> >> check my website's Problem Solving > Can't Save a Movie
>> > >> > >> > >> >> page
>> > >> > >> > >> >>
>> > >> > >> > >> >> --
>> > >> > >> > >> >> website references are to
>> > >> > >> > >> >>
>> > >> > >> > >> >> PapaJohn
>> > >> > >> > >> >>
>> > >> > >> > >> >>
>> > >> > >> > >> >> "Jags" <> wrote in
>> > >> > >> > >> >> message
>> > >> > >> > >> >> news:...
>> > >> > >> > >> >> > can anyone help on the below issue??
>> > >> > >> > >> >> >
>> > >> > >> > >> >> > "Jags" wrote:
>> > >> > >> > >> >> >
>> > >> > >> > >> >> >> Hi,
>> > >> > >> > >> >> >> I am using Vista Home Premium. I have created a
>> > >> > >> > >> >> >> movie
>> > >> > >> > >> >> >> with
>> > >> > >> > >> >> >> Movie
>> > >> > >> > >> >> >> Maker,
>> > >> > >> > >> >> >> and
>> > >> > >> > >> >> >> when i try to publish the movie with the default
>> > >> > >> > >> >> >> settings, its
>> > >> > >> > >> >> >> giving
>> > >> > >> > >> >> >> an
>> > >> > >> > >> >> >> error message: "Movie Maker can not publish the
>> > >> > >> > >> >> >> movie.
>> > >> > >> > >> >> >> The
>> > >> > >> > >> >> >> source
>> > >> > >> > >> >> >> files
>> > >> > >> > >> >> >> may
>> > >> > >> > >> >> >> not be available, or the disk space is not
>> > >> > >> > >> >> >> enouth...". I
>> > >> > >> > >> >> >> have
>> > >> > >> > >> >> >> my
>> > >> > >> > >> >> >> source
>> > >> > >> > >> >> >> files
>> > >> > >> > >> >> >> in the same path, 50GB of free disk space is there.
>> > >> > >> > >> >> >> But
>> > >> > >> > >> >> >> its
>> > >> > >> > >> >> >> not
>> > >> > >> > >> >> >> publishing
>> > >> > >> > >> >> >> the movie. But, if i select the third option the
>> > >> > >> > >> >> >> select
>> > >> > >> > >> >> >> bit
>> > >> > >> > >> >> >> rate
>> > >> > >> > >> >> >> window
>> > >> > >> > >> >> >> ie.,
>> > >> > >> > >> >> >> AVI-DV in the dropdown list, the publishing is
>> > >> > >> > >> >> >> successfull.
>> > >> > >> > >> >> >> But the
>> > >> > >> > >> >> >> .AVI
>> > >> > >> > >> >> >> file
>> > >> > >> > >> >> >> created is huge in size.
>> > >> > >> > >> >> >> Can anyone tell me what is wrong with movie maker,
>> > >> > >> > >> >> >> and
>> > >> > >> > >> >> >> why it
>> > >> > >> > >> >> >> is
>> > >> > >> > >> >> >> not
>> > >> > >> > >> >> >> able
>> > >> > >> > >> >> >> to
>> > >> > >> > >> >> >> publish the movie with default settings.
>> > >> > >> > >> >> >> Thanks and Regards...
>> > >> > >> > >> >>
>> > >> > >> > >> >>
>> > >> > >> > >> >>
>> > >> > >> > >>
>> > >> > >> > >>
>> > >> > >> > >>
>> > >> > >> >
>> > >> > >> >
>> > >> > >> >
>> > >> >
>> > >> >
>> > >> >
>> >
>> >
>> >