How to Disable DHCP When Deploying Vista/Server 2008 Using Sysprep and Unattend.xml

dln

Hello all,

I've run into a problem when trying to deploy either a Vista or Server 2008
syspreped image in conjunction with an Unattend.xml file. My problem is
this - the install, from start to finish, is supposed to be an unattended,
build-to-plan image. Part of the install involves assigning a static IP
address. Although I've been able to configure a static IP for the image, I
can't seem to disable DHCP for the image.

I have set the
x86_Microsoft-Windows-TCPIP_neutral/Interfaces/Interface[Identifier="1"]/Ipv4Settings/DhcpEnabled
value to "false" for configuration pass 4, but the setting is ignored for
some reason. I'm a complete newb when it comes to the Vista/Server 2008
deployment model so if someone could point me in the right direction, it
would be appreciated.

My unattend.xml file is listed below (Server 2008 listed, but the Vista one
is more or less similar). I'm imaging the system using the command "sysprep
/generalize /oobe /unattend:c:\sysprep\unattend.xml":

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="generalize">
<component name="Microsoft-Windows-ServerManager-SvrMgrNc"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
</component>
</settings>
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<EnableFirewall>true</EnableFirewall>
<EnableNetwork>true</EnableNetwork>
<Restart>Restart</Restart>
<DiskConfiguration>
<Disk wcm:action="add">
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<WillShowUI>OnError</WillShowUI>
</DiskConfiguration>
</component>
<component name="Microsoft-Windows-International-Core-WinPE"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Identification>
<JoinWorkgroup>Workgroup</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ComputerName>CHANGEMe</ComputerName>
<ProductKey>AAAAA-AAAAA-AAAAA-AAAAA-AAAAA</ProductKey>
<RegisteredOrganization>Org Name</RegisteredOrganization>
<RegisteredOwner>Product Services</RegisteredOwner>
</component>
<component name="Microsoft-Windows-TCPIP"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Interfaces>
<Interface wcm:action="add">
<Ipv4Settings>
<DhcpEnabled>false</DhcpEnabled>
<RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
</Ipv4Settings>
<Routes>
<Route wcm:action="add">
<Identifier>1</Identifier>
<NextHopAddress>10.10.50.193</NextHopAddress>
<Prefix>10.10.50.192/26</Prefix>
</Route>
</Routes>
<Identifier>1</Identifier>
<UnicastIpAddresses>
<IpAddress wcm:action="add"
wcm:keyValue="1">10.10.50.195/26</IpAddress>
</UnicastIpAddresses>
</Interface>
</Interfaces>
</component>
<component name="Microsoft-Windows-DNS-Client"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Interfaces>
<Interface wcm:action="add">
<DNSServerSearchOrder>
<IpAddress wcm:action="add"
wcm:keyValue="1">10.10.50.193</IpAddress>
</DNSServerSearchOrder>
<Identifier>1</Identifier>
</Interface>
</Interfaces>
</component>
<component name="Microsoft-Windows-Security-Licensing-SLC-UX"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>false</SkipAutoActivation>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup"
processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserAccounts>
<AdministratorPassword>
<Value>some encrypted value</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
</component>
</settings>
<cpifflineImage
cpi:source="wim:c:/windows/system32/sysprep/panther/install.wim#Windows
Longhorn SERVERSTANDARD" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

dln

I figured it out. I needed to specify "Local Area Connection" as the
Interface Identifier instead of an index number.

Thanks anyway.

"dln" <dnadon_nospm@hotmail.com> wrote in message
news:459EEECB-81F7-4231-806B-BAB5220ADAB1@microsoft.com...
> Hello all,
>
> I've run into a problem when trying to deploy either a Vista or Server
> 2008 syspreped image in conjunction with an Unattend.xml file. My problem
> is this - the install, from start to finish, is supposed to be an
> unattended, build-to-plan image. Part of the install involves assigning a
> static IP address. Although I've been able to configure a static IP for
> the image, I can't seem to disable DHCP for the image.
>
> I have set the
> x86_Microsoft-Windows-TCPIP_neutral/Interfaces/Interface[Identifier="1"]/Ipv4Settings/DhcpEnabled
> value to "false" for configuration pass 4, but the setting is ignored for
> some reason. I'm a complete newb when it comes to the Vista/Server 2008
> deployment model so if someone could point me in the right direction, it
> would be appreciated.
>
> My unattend.xml file is listed below (Server 2008 listed, but the Vista
> one is more or less similar). I'm imaging the system using the command
> "sysprep /generalize /oobe /unattend:c:\sysprep\unattend.xml":
>
> <?xml version="1.0" encoding="utf-8"?>
> <unattend xmlns="urn:schemas-microsoft-com:unattend">
> <settings pass="generalize">
> <component name="Microsoft-Windows-ServerManager-SvrMgrNc"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
>
> <DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
> </component>
> </settings>
> <settings pass="windowsPE">
> <component name="Microsoft-Windows-Setup"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <EnableFirewall>true</EnableFirewall>
> <EnableNetwork>true</EnableNetwork>
> <Restart>Restart</Restart>
> <DiskConfiguration>
> <Disk wcm:action="add">
> <DiskID>0</DiskID>
> <WillWipeDisk>true</WillWipeDisk>
> </Disk>
> <WillShowUI>OnError</WillShowUI>
> </DiskConfiguration>
> </component>
> <component name="Microsoft-Windows-International-Core-WinPE"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <SetupUILanguage>
> <UILanguage>en-US</UILanguage>
> </SetupUILanguage>
> <InputLocale>en-US</InputLocale>
> <SystemLocale>en-US</SystemLocale>
> <UILanguage>en-US</UILanguage>
> <UILanguageFallback>en-US</UILanguageFallback>
> <UserLocale>en-US</UserLocale>
> </component>
> </settings>
> <settings pass="specialize">
> <component name="Microsoft-Windows-UnattendedJoin"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <Identification>
> <JoinWorkgroup>Workgroup</JoinWorkgroup>
> </Identification>
> </component>
> <component name="Microsoft-Windows-Shell-Setup"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <ComputerName>CHANGEMe</ComputerName>
> <ProductKey>AAAAA-AAAAA-AAAAA-AAAAA-AAAAA</ProductKey>
> <RegisteredOrganization>Org Name</RegisteredOrganization>
> <RegisteredOwner>Product Services</RegisteredOwner>
> </component>
> <component name="Microsoft-Windows-TCPIP"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <Interfaces>
> <Interface wcm:action="add">
> <Ipv4Settings>
> <DhcpEnabled>false</DhcpEnabled>
>
> <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
> </Ipv4Settings>
> <Routes>
> <Route wcm:action="add">
> <Identifier>1</Identifier>
> <NextHopAddress>10.10.50.193</NextHopAddress>
> <Prefix>10.10.50.192/26</Prefix>
> </Route>
> </Routes>
> <Identifier>1</Identifier>
> <UnicastIpAddresses>
> <IpAddress wcm:action="add"
> wcm:keyValue="1">10.10.50.195/26</IpAddress>
> </UnicastIpAddresses>
> </Interface>
> </Interfaces>
> </component>
> <component name="Microsoft-Windows-DNS-Client"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <Interfaces>
> <Interface wcm:action="add">
> <DNSServerSearchOrder>
> <IpAddress wcm:action="add"
> wcm:keyValue="1">10.10.50.193</IpAddress>
> </DNSServerSearchOrder>
> <Identifier>1</Identifier>
> </Interface>
> </Interfaces>
> </component>
> <component name="Microsoft-Windows-Security-Licensing-SLC-UX"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <SkipAutoActivation>false</SkipAutoActivation>
> </component>
> </settings>
> <settings pass="oobeSystem">
> <component name="Microsoft-Windows-International-Core"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <InputLocale>en-US</InputLocale>
> <SystemLocale>en-US</SystemLocale>
> <UILanguage>en-US</UILanguage>
> <UILanguageFallback>en-US</UILanguageFallback>
> <UserLocale>en-US</UserLocale>
> </component>
> <component name="Microsoft-Windows-Shell-Setup"
> processorArchitecture="x86" publicKeyToken="31bf3856ad364e35"
> language="neutral" versionScope="nonSxS"
> xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <UserAccounts>
> <AdministratorPassword>
> <Value>some encrypted value</Value>
> <PlainText>false</PlainText>
> </AdministratorPassword>
> </UserAccounts>
> <OOBE>
> <HideEULAPage>true</HideEULAPage>
> <NetworkLocation>Work</NetworkLocation>
> <ProtectYourPC>1</ProtectYourPC>
> <SkipUserOOBE>true</SkipUserOOBE>
> </OOBE>
> </component>
> </settings>
> <cpifflineImage
> cpi:source="wim:c:/windows/system32/sysprep/panther/install.wim#Windows
> Longhorn SERVERSTANDARD" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
> </unattend>
>
>

Andrew2506

It doesn't work anyway

"dln" wrote:

> I figured it out. I needed to specify "Local Area Connection" as the
> Interface Identifier instead of an index number.
>
> Thanks anyway.
>
>

dln

Yeah, after much frustration, I came to that conclusion. I ended up running
a synchronous script in the specialize phase that executes netsh to set the
network parameters. The script is part of the image so it's always there.
Works like a charm.

"Andrew2506" <> wrote in message
news:...
> It doesn't work anyway
>
> "dln" wrote:
>
>> I figured it out. I needed to specify "Local Area Connection" as the
>> Interface Identifier instead of an index number.
>>
>> Thanks anyway.
>>
>>