JN

i started getting the error message exception processing message c0000013
parameters 75b6bf9c 4 75b6bf9c 75b6bf9c after i plugged in my friends usbthis
is what exactly happened:

i plugged in the usb my pc installed it then it asked me to restart i
clicked no. then when i opened the usb windows defender detected a
trojan/win32/shipup virus there were many i removed them when i was getting
these warnings from windows defender i also got the error message as shown
above. it had 3 buttons cancel, try again, continue only cancel worked i ad
to press it alot of times to get rid of the message. Then i unpluged the usb
and uninstalled it to stop the message but it continued coming. then i
realised when i connect my printer i get the error message as well as when
its disconnected i reinstalled my printer i thought it might get rid of the
problem but the message is still there.


printer:hp photosmart c4180
pcackard bell imedia 1559 windows xp home 5.1.2600 sp2

plz can anyone help me fix these issue

thank you

JN

just too let u know if you need anyore info just reply

JN

fixed no need to replay

bradshawd

How did you fix it cos I am now getting this with a slihtly different Address
range.



"JN" wrote:

> fixed no need to replay

rodrivera

could you please help me to fix it?

"JN" wrote:

> fixed no need to replay

rodrivera

please could you tell me how did you di it?, cause i got the same error too,
after plug my pendrive. Thanks a lot

"JN" wrote:

> fixed no need to replay

LEB

Could you Please tell me how you fixed the problem? I can't seem to figure
it out. Thanks

"JN" wrote:

> i started getting the error message exception processing message c0000013
> parameters 75b6bf9c 4 75b6bf9c 75b6bf9c after i plugged in my friends usbthis
> is what exactly happened:
>
> i plugged in the usb my pc installed it then it asked me to restart i
> clicked no. then when i opened the usb windows defender detected a
> trojan/win32/shipup virus there were many i removed them when i was getting
> these warnings from windows defender i also got the error message as shown
> above. it had 3 buttons cancel, try again, continue only cancel worked i ad
> to press it alot of times to get rid of the message. Then i unpluged the usb
> and uninstalled it to stop the message but it continued coming. then i
> realised when i connect my printer i get the error message as well as when
> its disconnected i reinstalled my printer i thought it might get rid of the
> problem but the message is still there.
>
>
> printer:hp photosmart c4180
> pcackard bell imedia 1559 windows xp home 5.1.2600 sp2
>
> plz can anyone help me fix these issue
>
> thank you

jeffshalomngsus

I started getting this message after installing Service Pack 3. Are there
any solutions out there?
Jeff

"LEB" wrote:

> Could you Please tell me how you fixed the problem? I can't seem to figure
> it out. Thanks
>
> "JN" wrote:
>
> > i started getting the error message exception processing message c0000013
> > parameters 75b6bf9c 4 75b6bf9c 75b6bf9c after i plugged in my friends usbthis
> > is what exactly happened:
> >
> > i plugged in the usb my pc installed it then it asked me to restart i
> > clicked no. then when i opened the usb windows defender detected a
> > trojan/win32/shipup virus there were many i removed them when i was getting
> > these warnings from windows defender i also got the error message as shown
> > above. it had 3 buttons cancel, try again, continue only cancel worked i ad
> > to press it alot of times to get rid of the message. Then i unpluged the usb
> > and uninstalled it to stop the message but it continued coming. then i
> > realised when i connect my printer i get the error message as well as when
> > its disconnected i reinstalled my printer i thought it might get rid of the
> > problem but the message is still there.
> >
> >
> > printer:hp photosmart c4180
> > pcackard bell imedia 1559 windows xp home 5.1.2600 sp2
> >
> > plz can anyone help me fix these issue
> >
> > thank you

MikeW

Mike W wrote
JN had the problem and I have the same message
What is the answer to fixing this as all the other questions about this does
not seem to be replied too

"JN" wrote:

> i started getting the error message exception processing message c0000013
> parameters 75b6bf9c 4 75b6bf9c 75b6bf9c after i plugged in my friends usbthis
> is what exactly happened:
>
> i plugged in the usb my pc installed it then it asked me to restart i
> clicked no. then when i opened the usb windows defender detected a
> trojan/win32/shipup virus there were many i removed them when i was getting
> these warnings from windows defender i also got the error message as shown
> above. it had 3 buttons cancel, try again, continue only cancel worked i ad
> to press it alot of times to get rid of the message. Then i unpluged the usb
> and uninstalled it to stop the message but it continued coming. then i
> realised when i connect my printer i get the error message as well as when
> its disconnected i reinstalled my printer i thought it might get rid of the
> problem but the message is still there.
>
>
> printer:hp photosmart c4180
> pcackard bell imedia 1559 windows xp home 5.1.2600 sp2
>
> plz can anyone help me fix these issue
>
> thank you

JudiM

Please somebody post the fix, it is driving me nuts too !!!!

"MikeW" wrote:

> Mike W wrote
> JN had the problem and I have the same message
> What is the answer to fixing this as all the other questions about this does
> not seem to be replied too
>
> "JN" wrote:
>
> > i started getting the error message exception processing message c0000013
> > parameters 75b6bf9c 4 75b6bf9c 75b6bf9c after i plugged in my friends usbthis
> > is what exactly happened:
> >
> > i plugged in the usb my pc installed it then it asked me to restart i
> > clicked no. then when i opened the usb windows defender detected a
> > trojan/win32/shipup virus there were many i removed them when i was getting
> > these warnings from windows defender i also got the error message as shown
> > above. it had 3 buttons cancel, try again, continue only cancel worked i ad
> > to press it alot of times to get rid of the message. Then i unpluged the usb
> > and uninstalled it to stop the message but it continued coming. then i
> > realised when i connect my printer i get the error message as well as when
> > its disconnected i reinstalled my printer i thought it might get rid of the
> > problem but the message is still there.
> >
> >
> > printer:hp photosmart c4180
> > pcackard bell imedia 1559 windows xp home 5.1.2600 sp2
> >
> > plz can anyone help me fix these issue
> >
> > thank you