DTM/PCIHCT test violates PCI Express Base Specification Revision 1

M

Mark

Guest
Hello:

Got DTM/PCIHCT failure report as below:

===========================
Start Test/ Serial Number Capability
Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
Error Type/ NT_STATUS
Error Code/ 0xc0000420
Error Text/ Error 0xc0000420
Message/ Devices of this class code must implement the Device Serial Number
Capability
Message/ Not found
End Test/ Serial Number Capability

===========================
According to PCI Express Base Specification Revision 1.1 Section 7.12, the
"Serial Number Capability" is defined as optional.

The PCI class code of the device is 0x028000.
Why DTM considers "Serial Number Capability" is a must function for this
kind of device ?
The requirement violates PCI Express Base Specification Revision 1.1. Any
one got this problem ? Any comment from MS ?

Mark



 


This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 
This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 
This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 
This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 
This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 
This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 
This is an additional requrement as found in the " Windows Hardware Logo
Program Requirements ".
this document can be found on this page
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx

the requrement is below.

CONNECT-0036 Version 2 Specific classes of PCI Express hot-plug devices
implement device serial numbers
Effective Date:
01-Jun-2007

Client Device
Basic R
Premium R


Expiration Date:


Status:
Approved


The PCI Express device serial number capability is required for all
ExpressCard, PCI ExpressMiniCard and PCI Express devices which are hot-plug
capable. The device serial number is a read-only, 64-bit value that is unique
for a specific PCI Express device. The communication device controller
category of devices, which must implement device serial numbers, includes ATM
devices, Bluetooth wireless technology devices, cable modems, DSL devices,
home phone line network devices, IrDA devices, LAN adapters, and WLAN
adapters. A PCI Express multifunction device component such as a PCI Express
switch that implements this capability must return the same device serial
number for each device.
Embedded USB Bluetooth adapters are not required to implement a USB serial
number unless there is any possibility that the USB port or hub could change
(for example in a docking station environment).
Design and Implementation Notes
See PCI Express Base Specification, Revision1.1 (or later), Section7.12.

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Mark" wrote:

> Hello:
>
> Got DTM/PCIHCT failure report as below:
>
> ===========================
> Start Test/ Serial Number Capability
> Error/ Assertion 60BDF3F8-01D208A14-04DA4C1B694A: FAILED.
> Error Type/ NT_STATUS
> Error Code/ 0xc0000420
> Error Text/ Error 0xc0000420
> Message/ Devices of this class code must implement the Device Serial Number
> Capability
> Message/ Not found
> End Test/ Serial Number Capability
>
> ===========================
> According to PCI Express Base Specification Revision 1.1 Section 7.12, the
> "Serial Number Capability" is defined as optional.
>
> The PCI class code of the device is 0x028000.
> Why DTM considers "Serial Number Capability" is a must function for this
> kind of device ?
> The requirement violates PCI Express Base Specification Revision 1.1. Any
> one got this problem ? Any comment from MS ?
>
> Mark
>
>
>
 

Back
Top