R
Rainy
Guest
Hi Nepatsfan..Sorry about my delay in answering, but I was working on this
yesterday for a lot of the day and evening to try and get the floppies to
"do" something.. I loaded the floppy, rebooted, a hard boot, then pressed F8
twice and landed in safemode, so I must be doing it at the wrong time.. I do
appreciate your help..oh I opted for the Windows Memory Diagnostic but the
only thing I was able to do was run the hdtune utility..
I tried, honest
I did.. hugs Rainy..
"Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
news:euSx7b3lIHA.3780@TK2MSFTNGP06.phx.gbl...
Answered inline.
"Rainy" <sweetwrapz@mchsi.com> wrote in message
news:u0sdvB3lIHA.5660@TK2MSFTNGP02.phx.gbl...
>I just downloaded the Maxtor utility and all it did was to have me create a
> bootable floppy drive.. I'm confused as to why.. since my Maxtor is my
> second drive, not the one with windows on it.. Can I boot with a non
> windows
> drive? I think I can but it didn't check my drive at all.. that's all it
> did..
After booting from the floppy, hit the F8 key twice. You should now be able
to
select the Maxtor drive by using the down arrow key. Keep in mind that since
you've already gotten good results from HD Tune, running this test is sort
of
like asking for a second opinion.
>
> I looked at the memtest86, but this is always my problem.. there are
> several
> to choose froom... b on the first choice and a on the second.. but don't
> know which one..
>
Download this file from the Memtest86 web site.
Pre-Compiled Memtest86 v3.4a installable from Windows and DOS
http://www.memtest86.com/memtest34a.zip
Open the zip file and extract the contents. Put a blank floppy in the drive.
Run
Install.bat and answer A: when asked for the target drive. Boot from the
floppy
to test your RAM. Keep in mind that the default tests could take a long time
to
run.
Microsoft also has a memory diagnostic program which you may find easier to
use.
Once again, it will create a bootable floppy to run the test.
Windows Memory Diagnostic
http://oca.microsoft.com/en/windiag.asp
Good luck
Nepatsfan
> Yes I ran the HD tune on both drives, and posted the results in my
> previous
> email.. you must not have seen it..
>
> As always any help appreciated.. Rainy
>
> a.. Download - Linux Memtest86 v3.4 Source and binary Package
> b.. Download - Pre-Compiled Memtest86 v3.4a installable from Windows and
> DOS
> ISO images suitable for creating a bootable Memtest86 CD-ROM
> a.. Download - Memtest86 v3.4a ISO image (zip)
> b.. Download - Memtest86 v3.4a ISO image (gzip)
>
>
> "Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
> news:u4N03K2lIHA.5024@TK2MSFTNGP06.phx.gbl...
> There's a utility designed to check Maxtor hard drives available at the
> web
> site
> listed below. You might want to run it to confirm the results you got with
> HD
> Tune.
>
> PowerMax v4.23
> http://www.tacktech.com/pub/mirror/maxtor/PwrMxEn.exe
>
> Just out of curiosity, have you run any tests on your C drive? I'm
> guessing
> that
> you have two hard drives in your computer.
>
> Also, did you run memtest86? Did you check the BIOS for an error log?
>
> Nepatsfan
>
> "Rainy" <sweetwrapz@mchsi.com> wrote in message
> news:%239smkp1lIHA.4244@TK2MSFTNGP06.phx.gbl...
>> thanks Nepatsfan, for the response.. sorry I thought when the link said
>> mem
>> something, you were asking for me to check my memory.. stupid assumption
>> on
>> my part since we were talking about hard drive errors.. brother!!!
>>
>> I ran Everest and I determined my hard drive in question is my D
>> Drive..which is a Maxtor Gl 080P0 but clicking on it, nothing appeared in
>> the lower pane..
>>
>> When I went to maxtor.com and clicked on troubleshooting, it brought me
>> to
>> Seagate, I am assuming again.. lol that Seagate bought out Maxtor.. but
>> of
>> course I could be wrong.but got a little lost when I was there, not
>> knowing
>> what to click on..
>>
>> Checked my hard drive with the utitity you mentioned and this is what it
>> said!! Unless I am reading this wrong, I am in pretty good shape. of
>> course
>> if you see something I don't.. please don't hesitate to tell me.. thanks!
>>
>> .I really do what to thank you for all your help.. it's the techs like
>> yourself that make this group awesome!! hugs Rainy ps I could not take
>> care of my computer without people like yourself! I don't have the money
>> or
>> means.. at least this way I can take care of it..
>>
>> Drive D "The one in question"
>>
>> HD Tune: Maxtor 6L080P0 Benchmark
>>
>> Transfer Rate Minimum : 31.0 MB/sec
>> Transfer Rate Maximum : 63.6 MB/sec
>> Transfer Rate Average : 53.2 MB/sec
>> Access Time : 13.1 ms
>> Burst Rate : 98.7 MB/sec
>> CPU Usage : 6.8%
>> HD Tune: Maxtor 6L080P0 Error Scan
>>
>> Scanned data : 78135 MB
>> Damaged Blocks : 0.0 %
>> Elapsed Time : 0:33
>> HD Tune: Maxtor 6L080P0 Health
>>
>> ID Current Worst ThresholdData
>> Status
>> (03) Spin Up Time 227 227 63 5050 Ok
>> (04) Start/Stop Count 253 253 0 47 Ok
>> (05) Reallocated Sector Count 253 253 63 0 Ok
>> (06) Read Channel Margin 253 253 100 0 Ok
>> (07) Seek Error Rate 253 252 0 0 Ok
>> (08) Seek Time Performance 250 245 187 38019 Ok
>> (09) Power On Hours Count 209 209 0 62528 Ok
>> (0A) Spin Retry Count 253 252 157 0 Ok
>> (0B) Calibration Retry Count 253 252 223 0 Ok
>> (0C) Power Cycle Count 253 253 0 205 Ok
>> (C0) Power Off Retract Count 253 253 0 0 Ok
>> (C1) Load Cycle Count 253 253 0 0 Ok
>> (C2) Temperature 38 253 0 44 Ok
>> (C3) Hardware ECC Recovered 253 252 0 4096 Ok
>> (C4) Reallocated Event Count 253 253 0 0 Ok
>> (C5) Current Pending Sector 253 253 0 0 Ok
>> (C6) Offline Uncorrectable 253 253 0 0 Ok
>> (C7) Ultra DMA CRC Error Count 199 199 0 0 Ok
>> (C8) Write Error Rate 253 252 0 0 Ok
>> (C9) TA Counter Detected 253 252 0 0 Ok
>> (CA) TA Counter Increased 253 252 0 0 Ok
>> (CB) Run Out Cancel 253 252 180 0 Ok
>> (CC) Soft ECC Correction 253 252 0 0 Ok
>> (CD) Thermal Asperity Rate 253 252 0 0 Ok
>> (CF) Spin High Current 253 252 0 0 Ok
>> (D0) Spin Buzz 253 252 0 0 Ok
>> (D1) Offline Seek Performance 241 241 0 145 Ok
>> (D2) (unknown attribute) 253 252 0 0 Ok
>> (D3) (unknown attribute) 253 252 0 0 Ok
>> (D4) (unknown attribute) 253 252 0 0 Ok
>>
>> Power On Time : 62528
>> Health Status : Ok
>> HD Tune: Maxtor 6L080P0 Error Scan
>>
>> Scanned data : 78135 MB
>> Damaged Blocks : 0.0 %
>> Elapsed Time : 0:33
>>
>>
>>
>>
>> Drive C
>> HD Tune: WDC WD600LB-55DNA0 Benchmark
>>
>> Transfer Rate Minimum : 31.0 MB/sec
>> Transfer Rate Maximum : 63.6 MB/sec
>> Transfer Rate Average : 53.2 MB/sec
>> Access Time : 13.1 ms
>> Burst Rate : 98.7 MB/sec
>> CPU Usage : 6.8%
>>
>> HD Tune: WDC WD600LB-55DNA0 Information
>>
>> Firmware version : 77.07W77
>> Serial number : WD-WMADW1189991
>> Capacity : 55.9 GB (~60.0 GB)
>> Buffer size : 2048 KB
>> Standard : ATA/ATAPI-6
>> Supported mode : UDMA Mode 5 (Ultra ATA/100)
>> Current mode : UDMA Mode 5 (Ultra ATA/100)
>>
>> S.M.A.R.T : yes
>> 48-bit Address : yes
>> Read Look-Ahead : yes
>> Write Cache : yes
>> Host Protected Area : yes
>> Device Configuration Overlay : yes
>> Automatic Acoustic Management: yes
>> Power Management : yes
>> Advanced Power Management : no
>> Power-up in Standby : no
>> Security Mode : yes
>> Firmware Upgradable : yes
>>
>> Partition : 1
>> Drive letter : C:\
>> Label :
>> Capacity : 57239 MB
>> Usage : 71.91%
>> Type : NTFS
>> Bootable : Yes
>>
>> HD Tune: WDC WD600LB-55DNA0 Health
>>
>> ID Current Worst ThresholdData
>> Status
>> (01) Raw Read Error Rate 200 200 51 0 Ok
>> (03) Spin Up Time 87 86 21 2158 Ok
>> (04) Start/Stop Count 100 100 40 244 Ok
>> (05) Reallocated Sector Count 200 200 140 0 Ok
>> (07) Seek Error Rate 100 253 51 0 Ok
>> (09) Power On Hours Count 74 74 0 19476 Ok
>> (0A) Spin Retry Count 100 100 51 0 Ok
>> (0B) Calibration Retry Count 100 100 51 0 Ok
>> (0C) Power Cycle Count 100 100 0 231 Ok
>> (C2) Temperature 100 253 0 43 Ok
>> (C4) Reallocated Event Count 200 200 0 0 Ok
>> (C5) Current Pending Sector 200 200 0 0 Ok
>> (C6) Offline Uncorrectable 200 200 0 0 Ok
>> (C7) Ultra DMA CRC Error Count 200 253 0 0 Ok
>> (C8) Write Error Rate 200 85 51 0 Ok
>>
>> Power On Time : 19476
>> Health Status : Ok
>>
>> HD Tune: WDC WD600LB-55DNA0 Error Scan
>>
>> Scanned data : 57219 MB
>> Damaged Blocks : 0.0 %
>> Elapsed Time : 0:36
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> "Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
>> news:eBAJdV0lIHA.3636@TK2MSFTNGP02.phx.gbl...
>> Rainy,
>>
>> You're right about Everest Home Edition. It's an updated version of
>> Aida32.
>>
>> That said, the reason I suggested you download that program was to help
>> identify
>> your hard drive's make and model #, not to test your system's RAM. Look
>> under
>> the Storage branch for the Windows Storage entry. Your hard drive should
>> be
>> listed in the right hand pane. Click on it and information will be
>> displayed
>> in
>> the lower pane. Once you identify the hard drive, you can go to the
>> manufacturer's web site and see if they have a hard drive diagnostic
>> utility
>> available for download.
>>
>> Another option to test your hard drive is this program. The free version,
>> 2.55,
>> is fine. You don't have to download version 3.0.
>>
>> HD Tune
>> http://www.hdtune.com/
>>
>> As for testing your system's RAM, you can run this program.
>>
>> Memtest86
>> http://www.memtest86.com/
>>
>> Finally, it's PSU, not PCU. A PSU is your computer's Power Supply Unit.
>> It's
>> the
>> box at the top of the case where the power cord is connected. On
>> occasion,
>> a
>> malfunctioning power supply unit can cause your system to freeze. That's
>> why
>> I
>> mentioned it in my earlier response. Testing a power supply unit isn't
>> something
>> that the average computer user should attempt. As I stated earlier, if
>> the
>> power
>> supply unit is suspected of being defective, replace it with a new one.
>> This
>> would be done after all other suspects have been eliminated.
>>
>> Sorry for the confusion,
>>
>> Nepatsfan
>>
>> "Rainy" <sweetwrapz@mchsi.com> wrote in message
>> news:OOXd2A0lIHA.5660@TK2MSFTNGP02.phx.gbl...
>>> Hi Nepatsfnh, Yes I have been a member of this group for some time.. and
>>> have gotten some wonderful information here... I back up regularly and
>>> after
>>> this happened this morning, I began the process of backing up once
>>> again..
>>> it takes all day.. such a chore, but if I don't want to lose what I have
>>> it's necessary I just downloaded Everest seems like it's similar to
>>> Belarc Advisor, or Aida32.. here is what it said about my ram
>>>
>>> --------[ EVEREST Home Edition (c) 2003-2005 Lavalys,
>>> Inc. ]------------------------------------------------------------
>>>
>>> Version EVEREST v2.20.405
>>> Homepage
>>> http://www.lavalys.com/
>>> Report Type Quick Report
>>> Computer MYCOMPUTER
>>> Generator Rainy
>>> Operating System Microsoft Windows
>>> XP
>>> Home Edition 5.1.2600 (WinXP Retail)
>>> Date 2008-04-05
>>> Time 11:55
>>>
>>>
>>> --------[
>>> Memory ]------------------------------------------------------------------------------------------------------
>>>
>>> Physical Memory:
>>> Total 1023 MB
>>> Used 367 MB
>>> Free 655 MB
>>> Utilization 36 %
>>>
>>> Swap Space:
>>> Total 2462 MB
>>> Used 381 MB
>>> Free 2080 MB
>>> Utilization 15 %
>>>
>>> Virtual Memory:
>>> Total 3485 MB
>>> Used 748 MB
>>> Free 2736 MB
>>> Utilization 21 %
>>>
>>> Physical Address Extension (PAE):
>>> Supported by Operating System Yes
>>> Supported by CPU Yes
>>> Active No
>>>
>>> If you see anything that could be a concern to me, please let me know.
>>> If
>>> there is anything I can change, like swap size which will help my
>>> computer,
>>> I would love to know..
>>>
>>> . I don't know what PCU is... sorry if this is a lame question.. but
>>> have
>>> never to my recollection seen PCwith a U after it.. Information
>>> appreciated
>>> Rainy
>>>
>>>
>>>
>>> I downloaded
>>> "Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
>>> news:%23vFRfAzlIHA.1212@TK2MSFTNGP05.phx.gbl...
>>> "Rainy" <sweetwrapz@mchsi.com> wrote in message
>>> news:OdZt15xlIHA.944@TK2MSFTNGP05.phx.gbl...
>>>> Hi..this morning after waking up, I found my computer frozen, and was
>>>> forced
>>>> to at first restart which let me to a screen that told me Hardware
>>>> Monitor
>>>> found an error and to click F! to continue.. I was not able to get F1
>>>> to
>>>> respond, and after trying a couple of times to turn off my computer
>>>> manually, I was finally able to get to a screen where Chkdsk was
>>>> checking
>>>> for errors.. it seemed to fix them, finding several minor errors and
>>>> even
>>>> an
>>>> error in a gif file. Can someone tell me if there is something I can
>>>> do
>>>> to
>>>> fix the problem or if chkdsk corrected the errors, and is everything ok
>>>> now??? sure hope so! Appreciate any response, thanks Rainy..
>>>>
>>>>
>>>
>>>
>>> Rainy,
>>>
>>> You've been around here long enough to know this first point already.
>>> I'm
>>> including it for the benefit of others.
>>>
>>> Your first priority should be to make sure all your important files are
>>> backed
>>> up. CD/DVDs are preferable but an external hard drive will do if that's
>>> all
>>> you
>>> have available. Once you've done that, test the backup to make sure you
>>> can
>>> restore your files in a worst case scenario.
>>>
>>> Now, back to your problem. Odds are this is a hardware issue. The usual
>>> suspects
>>> are your hard drive, power supply unit, or memory.
>>>
>>> If you're curious about what the Hardware Monitor error was, you will
>>> have
>>> to
>>> get into your system's BIOS and look for an error report. Look on the
>>> screen
>>> when your computer first boots for the key you need to hit to access the
>>> BIOS
>>> setup program. F2 and DEL are the most common ones.
>>>
>>> To view the chkdsk results, do the following;
>>>
>>> Go to Start -> Run and enter eventvwr.msc in the Open box.
>>> Note: You can also access Event Viewer through Control Panel ->
>>> Administrative
>>> Tools.
>>> In Event Viewer, click on Application in the left hand column.
>>> Look in the right hand pane for a recent entry with Winlogon as the
>>> Source
>>> and
>>> 1001 for the Event ID .
>>> Double click on the entry to see the results.
>>>
>>> You might want to check the hard drive manufacturer's web site to see if
>>> they
>>> have a diagnostic utility available. If you're not sure what make and
>>> model
>>> hard
>>> drive is installed in your computer, you can check System Information,
>>> (Start ->
>>> All Programs -> Accessories -> System Tools -> System Information). This
>>> utility
>>> can also be accessed through Start -> Run -> msinfo32.exe. Look under
>>> Components -> Storage -> Disks.
>>>
>>> If you prefer, you can use a program such as Everest Home Edition to
>>> find
>>> out
>>> who manufactured your hard drive.
>>>
>>> http://www.majorgeeks.com/download4181.html
>>>
>>> Here's a program which will test your system's RAM.
>>>
>>> Memtest86
>>> http://www.memtest86.com/
>>>
>>> Testing a PSU is not something I'd recommend the average user attempt.
>>> If
>>> a
>>> PSU
>>> is suspected, the usual procedure is to replace it with a known working
>>> unit.
>>>
>>> Good luck
>>>
>>> Nepatsfan
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>
yesterday for a lot of the day and evening to try and get the floppies to
"do" something.. I loaded the floppy, rebooted, a hard boot, then pressed F8
twice and landed in safemode, so I must be doing it at the wrong time.. I do
appreciate your help..oh I opted for the Windows Memory Diagnostic but the
only thing I was able to do was run the hdtune utility..
I tried, honestI did.. hugs Rainy..
"Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
news:euSx7b3lIHA.3780@TK2MSFTNGP06.phx.gbl...
Answered inline.
"Rainy" <sweetwrapz@mchsi.com> wrote in message
news:u0sdvB3lIHA.5660@TK2MSFTNGP02.phx.gbl...
>I just downloaded the Maxtor utility and all it did was to have me create a
> bootable floppy drive.. I'm confused as to why.. since my Maxtor is my
> second drive, not the one with windows on it.. Can I boot with a non
> windows
> drive? I think I can but it didn't check my drive at all.. that's all it
> did..
After booting from the floppy, hit the F8 key twice. You should now be able
to
select the Maxtor drive by using the down arrow key. Keep in mind that since
you've already gotten good results from HD Tune, running this test is sort
of
like asking for a second opinion.
>
> I looked at the memtest86, but this is always my problem.. there are
> several
> to choose froom... b on the first choice and a on the second.. but don't
> know which one..
>
Download this file from the Memtest86 web site.
Pre-Compiled Memtest86 v3.4a installable from Windows and DOS
http://www.memtest86.com/memtest34a.zip
Open the zip file and extract the contents. Put a blank floppy in the drive.
Run
Install.bat and answer A: when asked for the target drive. Boot from the
floppy
to test your RAM. Keep in mind that the default tests could take a long time
to
run.
Microsoft also has a memory diagnostic program which you may find easier to
use.
Once again, it will create a bootable floppy to run the test.
Windows Memory Diagnostic
http://oca.microsoft.com/en/windiag.asp
Good luck
Nepatsfan
> Yes I ran the HD tune on both drives, and posted the results in my
> previous
> email.. you must not have seen it..
>
> As always any help appreciated.. Rainy
>
> a.. Download - Linux Memtest86 v3.4 Source and binary Package
> b.. Download - Pre-Compiled Memtest86 v3.4a installable from Windows and
> DOS
> ISO images suitable for creating a bootable Memtest86 CD-ROM
> a.. Download - Memtest86 v3.4a ISO image (zip)
> b.. Download - Memtest86 v3.4a ISO image (gzip)
>
>
> "Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
> news:u4N03K2lIHA.5024@TK2MSFTNGP06.phx.gbl...
> There's a utility designed to check Maxtor hard drives available at the
> web
> site
> listed below. You might want to run it to confirm the results you got with
> HD
> Tune.
>
> PowerMax v4.23
> http://www.tacktech.com/pub/mirror/maxtor/PwrMxEn.exe
>
> Just out of curiosity, have you run any tests on your C drive? I'm
> guessing
> that
> you have two hard drives in your computer.
>
> Also, did you run memtest86? Did you check the BIOS for an error log?
>
> Nepatsfan
>
> "Rainy" <sweetwrapz@mchsi.com> wrote in message
> news:%239smkp1lIHA.4244@TK2MSFTNGP06.phx.gbl...
>> thanks Nepatsfan, for the response.. sorry I thought when the link said
>> mem
>> something, you were asking for me to check my memory.. stupid assumption
>> on
>> my part since we were talking about hard drive errors..
brother!!!>>
>> I ran Everest and I determined my hard drive in question is my D
>> Drive..which is a Maxtor Gl 080P0 but clicking on it, nothing appeared in
>> the lower pane..
>>
>> When I went to maxtor.com and clicked on troubleshooting, it brought me
>> to
>> Seagate, I am assuming again.. lol that Seagate bought out Maxtor.. but
>> of
>> course I could be wrong.but got a little lost when I was there, not
>> knowing
>> what to click on..
>>
>> Checked my hard drive with the utitity you mentioned and this is what it
>> said!! Unless I am reading this wrong, I am in pretty good shape. of
>> course
>> if you see something I don't.. please don't hesitate to tell me.. thanks!
>>
>> .I really do what to thank you for all your help.. it's the techs like
>> yourself that make this group awesome!!
hugs Rainy ps I could not take>> care of my computer without people like yourself! I don't have the money
>> or
>> means.. at least this way I can take care of it..
>>
>> Drive D "The one in question"
>>
>> HD Tune: Maxtor 6L080P0 Benchmark
>>
>> Transfer Rate Minimum : 31.0 MB/sec
>> Transfer Rate Maximum : 63.6 MB/sec
>> Transfer Rate Average : 53.2 MB/sec
>> Access Time : 13.1 ms
>> Burst Rate : 98.7 MB/sec
>> CPU Usage : 6.8%
>> HD Tune: Maxtor 6L080P0 Error Scan
>>
>> Scanned data : 78135 MB
>> Damaged Blocks : 0.0 %
>> Elapsed Time : 0:33
>> HD Tune: Maxtor 6L080P0 Health
>>
>> ID Current Worst ThresholdData
>> Status
>> (03) Spin Up Time 227 227 63 5050 Ok
>> (04) Start/Stop Count 253 253 0 47 Ok
>> (05) Reallocated Sector Count 253 253 63 0 Ok
>> (06) Read Channel Margin 253 253 100 0 Ok
>> (07) Seek Error Rate 253 252 0 0 Ok
>> (08) Seek Time Performance 250 245 187 38019 Ok
>> (09) Power On Hours Count 209 209 0 62528 Ok
>> (0A) Spin Retry Count 253 252 157 0 Ok
>> (0B) Calibration Retry Count 253 252 223 0 Ok
>> (0C) Power Cycle Count 253 253 0 205 Ok
>> (C0) Power Off Retract Count 253 253 0 0 Ok
>> (C1) Load Cycle Count 253 253 0 0 Ok
>> (C2) Temperature 38 253 0 44 Ok
>> (C3) Hardware ECC Recovered 253 252 0 4096 Ok
>> (C4) Reallocated Event Count 253 253 0 0 Ok
>> (C5) Current Pending Sector 253 253 0 0 Ok
>> (C6) Offline Uncorrectable 253 253 0 0 Ok
>> (C7) Ultra DMA CRC Error Count 199 199 0 0 Ok
>> (C8) Write Error Rate 253 252 0 0 Ok
>> (C9) TA Counter Detected 253 252 0 0 Ok
>> (CA) TA Counter Increased 253 252 0 0 Ok
>> (CB) Run Out Cancel 253 252 180 0 Ok
>> (CC) Soft ECC Correction 253 252 0 0 Ok
>> (CD) Thermal Asperity Rate 253 252 0 0 Ok
>> (CF) Spin High Current 253 252 0 0 Ok
>> (D0) Spin Buzz 253 252 0 0 Ok
>> (D1) Offline Seek Performance 241 241 0 145 Ok
>> (D2) (unknown attribute) 253 252 0 0 Ok
>> (D3) (unknown attribute) 253 252 0 0 Ok
>> (D4) (unknown attribute) 253 252 0 0 Ok
>>
>> Power On Time : 62528
>> Health Status : Ok
>> HD Tune: Maxtor 6L080P0 Error Scan
>>
>> Scanned data : 78135 MB
>> Damaged Blocks : 0.0 %
>> Elapsed Time : 0:33
>>
>>
>>
>>
>> Drive C
>> HD Tune: WDC WD600LB-55DNA0 Benchmark
>>
>> Transfer Rate Minimum : 31.0 MB/sec
>> Transfer Rate Maximum : 63.6 MB/sec
>> Transfer Rate Average : 53.2 MB/sec
>> Access Time : 13.1 ms
>> Burst Rate : 98.7 MB/sec
>> CPU Usage : 6.8%
>>
>> HD Tune: WDC WD600LB-55DNA0 Information
>>
>> Firmware version : 77.07W77
>> Serial number : WD-WMADW1189991
>> Capacity : 55.9 GB (~60.0 GB)
>> Buffer size : 2048 KB
>> Standard : ATA/ATAPI-6
>> Supported mode : UDMA Mode 5 (Ultra ATA/100)
>> Current mode : UDMA Mode 5 (Ultra ATA/100)
>>
>> S.M.A.R.T : yes
>> 48-bit Address : yes
>> Read Look-Ahead : yes
>> Write Cache : yes
>> Host Protected Area : yes
>> Device Configuration Overlay : yes
>> Automatic Acoustic Management: yes
>> Power Management : yes
>> Advanced Power Management : no
>> Power-up in Standby : no
>> Security Mode : yes
>> Firmware Upgradable : yes
>>
>> Partition : 1
>> Drive letter : C:\
>> Label :
>> Capacity : 57239 MB
>> Usage : 71.91%
>> Type : NTFS
>> Bootable : Yes
>>
>> HD Tune: WDC WD600LB-55DNA0 Health
>>
>> ID Current Worst ThresholdData
>> Status
>> (01) Raw Read Error Rate 200 200 51 0 Ok
>> (03) Spin Up Time 87 86 21 2158 Ok
>> (04) Start/Stop Count 100 100 40 244 Ok
>> (05) Reallocated Sector Count 200 200 140 0 Ok
>> (07) Seek Error Rate 100 253 51 0 Ok
>> (09) Power On Hours Count 74 74 0 19476 Ok
>> (0A) Spin Retry Count 100 100 51 0 Ok
>> (0B) Calibration Retry Count 100 100 51 0 Ok
>> (0C) Power Cycle Count 100 100 0 231 Ok
>> (C2) Temperature 100 253 0 43 Ok
>> (C4) Reallocated Event Count 200 200 0 0 Ok
>> (C5) Current Pending Sector 200 200 0 0 Ok
>> (C6) Offline Uncorrectable 200 200 0 0 Ok
>> (C7) Ultra DMA CRC Error Count 200 253 0 0 Ok
>> (C8) Write Error Rate 200 85 51 0 Ok
>>
>> Power On Time : 19476
>> Health Status : Ok
>>
>> HD Tune: WDC WD600LB-55DNA0 Error Scan
>>
>> Scanned data : 57219 MB
>> Damaged Blocks : 0.0 %
>> Elapsed Time : 0:36
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> "Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
>> news:eBAJdV0lIHA.3636@TK2MSFTNGP02.phx.gbl...
>> Rainy,
>>
>> You're right about Everest Home Edition. It's an updated version of
>> Aida32.
>>
>> That said, the reason I suggested you download that program was to help
>> identify
>> your hard drive's make and model #, not to test your system's RAM. Look
>> under
>> the Storage branch for the Windows Storage entry. Your hard drive should
>> be
>> listed in the right hand pane. Click on it and information will be
>> displayed
>> in
>> the lower pane. Once you identify the hard drive, you can go to the
>> manufacturer's web site and see if they have a hard drive diagnostic
>> utility
>> available for download.
>>
>> Another option to test your hard drive is this program. The free version,
>> 2.55,
>> is fine. You don't have to download version 3.0.
>>
>> HD Tune
>> http://www.hdtune.com/
>>
>> As for testing your system's RAM, you can run this program.
>>
>> Memtest86
>> http://www.memtest86.com/
>>
>> Finally, it's PSU, not PCU. A PSU is your computer's Power Supply Unit.
>> It's
>> the
>> box at the top of the case where the power cord is connected. On
>> occasion,
>> a
>> malfunctioning power supply unit can cause your system to freeze. That's
>> why
>> I
>> mentioned it in my earlier response. Testing a power supply unit isn't
>> something
>> that the average computer user should attempt. As I stated earlier, if
>> the
>> power
>> supply unit is suspected of being defective, replace it with a new one.
>> This
>> would be done after all other suspects have been eliminated.
>>
>> Sorry for the confusion,
>>
>> Nepatsfan
>>
>> "Rainy" <sweetwrapz@mchsi.com> wrote in message
>> news:OOXd2A0lIHA.5660@TK2MSFTNGP02.phx.gbl...
>>> Hi Nepatsfnh, Yes I have been a member of this group for some time.. and
>>> have gotten some wonderful information here... I back up regularly and
>>> after
>>> this happened this morning, I began the process of backing up once
>>> again..
>>> it takes all day.. such a chore, but if I don't want to lose what I have
>>> it's necessary
I just downloaded Everest seems like it's similar to>>> Belarc Advisor, or Aida32.. here is what it said about my ram
>>>
>>> --------[ EVEREST Home Edition (c) 2003-2005 Lavalys,
>>> Inc. ]------------------------------------------------------------
>>>
>>> Version EVEREST v2.20.405
>>> Homepage
>>> http://www.lavalys.com/
>>> Report Type Quick Report
>>> Computer MYCOMPUTER
>>> Generator Rainy
>>> Operating System Microsoft Windows
>>> XP
>>> Home Edition 5.1.2600 (WinXP Retail)
>>> Date 2008-04-05
>>> Time 11:55
>>>
>>>
>>> --------[
>>> Memory ]------------------------------------------------------------------------------------------------------
>>>
>>> Physical Memory:
>>> Total 1023 MB
>>> Used 367 MB
>>> Free 655 MB
>>> Utilization 36 %
>>>
>>> Swap Space:
>>> Total 2462 MB
>>> Used 381 MB
>>> Free 2080 MB
>>> Utilization 15 %
>>>
>>> Virtual Memory:
>>> Total 3485 MB
>>> Used 748 MB
>>> Free 2736 MB
>>> Utilization 21 %
>>>
>>> Physical Address Extension (PAE):
>>> Supported by Operating System Yes
>>> Supported by CPU Yes
>>> Active No
>>>
>>> If you see anything that could be a concern to me, please let me know.
>>> If
>>> there is anything I can change, like swap size which will help my
>>> computer,
>>> I would love to know..
>>>
>>> . I don't know what PCU is... sorry if this is a lame question..
but>>> have
>>> never to my recollection seen PCwith a U after it.. Information
>>> appreciated
>>> Rainy
>>>
>>>
>>>
>>> I downloaded
>>> "Nepatsfan" <nepatsfan@SBXXXIX.com> wrote in message
>>> news:%23vFRfAzlIHA.1212@TK2MSFTNGP05.phx.gbl...
>>> "Rainy" <sweetwrapz@mchsi.com> wrote in message
>>> news:OdZt15xlIHA.944@TK2MSFTNGP05.phx.gbl...
>>>> Hi..this morning after waking up, I found my computer frozen, and was
>>>> forced
>>>> to at first restart which let me to a screen that told me Hardware
>>>> Monitor
>>>> found an error and to click F! to continue.. I was not able to get F1
>>>> to
>>>> respond, and after trying a couple of times to turn off my computer
>>>> manually, I was finally able to get to a screen where Chkdsk was
>>>> checking
>>>> for errors.. it seemed to fix them, finding several minor errors and
>>>> even
>>>> an
>>>> error in a gif file. Can someone tell me if there is something I can
>>>> do
>>>> to
>>>> fix the problem or if chkdsk corrected the errors, and is everything ok
>>>> now???
sure hope so! Appreciate any response, thanks Rainy..>>>>
>>>>
>>>
>>>
>>> Rainy,
>>>
>>> You've been around here long enough to know this first point already.
>>> I'm
>>> including it for the benefit of others.
>>>
>>> Your first priority should be to make sure all your important files are
>>> backed
>>> up. CD/DVDs are preferable but an external hard drive will do if that's
>>> all
>>> you
>>> have available. Once you've done that, test the backup to make sure you
>>> can
>>> restore your files in a worst case scenario.
>>>
>>> Now, back to your problem. Odds are this is a hardware issue. The usual
>>> suspects
>>> are your hard drive, power supply unit, or memory.
>>>
>>> If you're curious about what the Hardware Monitor error was, you will
>>> have
>>> to
>>> get into your system's BIOS and look for an error report. Look on the
>>> screen
>>> when your computer first boots for the key you need to hit to access the
>>> BIOS
>>> setup program. F2 and DEL are the most common ones.
>>>
>>> To view the chkdsk results, do the following;
>>>
>>> Go to Start -> Run and enter eventvwr.msc in the Open box.
>>> Note: You can also access Event Viewer through Control Panel ->
>>> Administrative
>>> Tools.
>>> In Event Viewer, click on Application in the left hand column.
>>> Look in the right hand pane for a recent entry with Winlogon as the
>>> Source
>>> and
>>> 1001 for the Event ID .
>>> Double click on the entry to see the results.
>>>
>>> You might want to check the hard drive manufacturer's web site to see if
>>> they
>>> have a diagnostic utility available. If you're not sure what make and
>>> model
>>> hard
>>> drive is installed in your computer, you can check System Information,
>>> (Start ->
>>> All Programs -> Accessories -> System Tools -> System Information). This
>>> utility
>>> can also be accessed through Start -> Run -> msinfo32.exe. Look under
>>> Components -> Storage -> Disks.
>>>
>>> If you prefer, you can use a program such as Everest Home Edition to
>>> find
>>> out
>>> who manufactured your hard drive.
>>>
>>> http://www.majorgeeks.com/download4181.html
>>>
>>> Here's a program which will test your system's RAM.
>>>
>>> Memtest86
>>> http://www.memtest86.com/
>>>
>>> Testing a PSU is not something I'd recommend the average user attempt.
>>> If
>>> a
>>> PSU
>>> is suspected, the usual procedure is to replace it with a known working
>>> unit.
>>>
>>> Good luck
>>>
>>> Nepatsfan
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>